[1] Bentsman, J., Hong, K. S., and Fakhfakh, J., "Vibrational control of nonlinear time lag systems: Vibrational stabilization and transient behavior," Preprints of the IFAC Symposium on Nonlinear Control Systems Design, Capri, Italy, pp. 379-384, June 14-16, 1989.
[2] Bentsman, J. and Hong, K.-S., "Vibrational stabilization and transient behavior analysis of nonlinear parabolic systems with Neumann boundary conditions," Proceedings of the 28th IEEE Conference on Decision and Control, Tampa, FL, pp. 1438-1443, December 13-15, 1989.
[3] Hong, K. S. and Bentsman, J., "Stability criterion for linear oscillatory parabolic systems with Neumann boundary conditions," Proceedings of 1989 American Control Conference, Pittsburgh, PA, pp. 1177-1181, June 21-23, 1989.
[4] Hong, K. S. and Bentsman, J., "Nonlinear control of diffusion processes with uncertain parameters using MRAC approach," Proceedings of 1992 American Control Conference, Chicago, IL, pp. 1343-1347, June 24-26, 1992.
[5] Hong, K. S. and Bentsman, J., "Application of averaging method for integro-differential equations to model reference adaptive control of parabolic systems," Preprints of the 4th IFAC Symposium on Adaptive Systems in Control and Signal Processing, Juillet, France, pp. 591-596, July 1-3, 1992.
[6] Hong, K. S. and Wu, J. W., "New conditions for the exponential stability of evolution equations," Proceedings of the 31st IEEE Conference on Decision and Control, Tucson, AZ, pp. 363-364, December 16-18, 1992.
[7] Bentsman, J., Solo, V., and Hong, K. S., "Adaptive control of a parabolic system with time-varying parameters: An averaging analysis," Proceedings of the 31st IEEE Conference on Decision and Control, Tucson, AZ, pp. 710-711, December 16-18, 1992.
[8] Hong, K. S. and Bentsman, J., "Averaging for a hybrid system arising in the direct adaptive control of parabolic systems and its applications to stability analysis," Preprints of the 12th World Congress of IFAC, Sydney, Australia, vol. 4, pp. 177-180, July 18-23, 1993.
[9] Hong, K. S. and Bentsman, J., "Direct adaptive control of parabolic systems: Algorithm synthesis and convergence and stability analysis," Proceedings of the 32nd IEEE Conference on Decision and Control, San Antonio, TX, pp. 2413-2418, December 1993.
[10] Lee, M. H., Baek, W. B., Lee, J. N., Yoon, K. S., and Hong, K. S., "A stabilizing controller design for flexible joint robot manipulators," Proceedings of the 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems, Yokohama, Japan, pp. 805-809, July 26-30, 1993.
[11] Hong, K.-S., "Conditions for the exponential stability for linear nonautonomous systems," Proceedings of 93 Korea Automatic Control Conference, Seoul, Korea, pp. 420-424, October 20-22, 1993.
[12] Hong, K.-S. and Wu, J. W., "Delay-independent stability for time-varying discrete systems," Proceedings of the 1993 KSME Fall Annual Meeting, pp. 628-630, April 1993.
[13] Hong, K.-S., "Stability and tunability of an adaptive controller for one-dimensional parabolic PDE with spatially-varying coefficients," Proceedings of the 1993 KSME Fall Annual Meeting, pp. 631-634, April 1993.
[14] Hong, K.-S., "New convergence analysis in adaptive systems," Proceedings of the 1994 KSME Fall Annual Meeting, pp. 664-667, April 1994.
[15] Hong, K.-S. and Hong, Y. D., "Asymptotic behavior in adaptive systems: Analysis without the Barbalat's lemma," Proceedings of the 94 Korea Automatic Control Conference, Daejon, Korea, pp. 277-282, October 17-20, 1994.
[16] Hong, Y. D. and Hong, K.-S., "An expediting heuristic for the shortest processing time dispatching rule: Comparison and modification," Preprints of the 1st International Sym. on Advances in Intelligent Computer Integrated Manufacturing System, Seoul, pp. 143-149, November 21-23, 1994.
[17] Hong, K.-S., "Note on behavior of a coupled nonautonomous ordinary differential equation," Proceedings of the 95 Korea Automatic Control Conference, Seoul, Korea, pp. 227-230, October 23-25, 1995.
[18] Hong, K.-S., "On asymptotic behavior of a coupled nonautonomous system: Application to adaptive controls,” Preprints of the 1996 IFAC World Congress, San Francisco, CA, vol. K, pp. 1-6, June 30 - July 5, 1996.
[19] Hong, K.-S., Kim, Y. M., Choi, J., Shin, G., and Yeom, Y. I., "Inverse kinematics of a serial manipulator: Redundancy and a closed form solution by exploiting geometric constraint," Proceedings of the International Sessions in '96 KSME Fall Annual Meeting, Inha Univ., Incheon, pp. 204-211, November 1-2, 1996.
[20] Hong, K.-S., Kim, Y. M., and Choi, C., "Inverse kinematics of a serial manipulator: Kinematic redundancy and two approaches for closed-form solutions," Proceedings of the IEEE International Conference on Robotics and Automation, Albuquerque, New Mexico, pp. 780-785, April 21-25, 1997.
[21] Choi, J. W., Yang, K. J., Kim, J. S., Han, M. C., and Hong, K.-S., "Development of an object-oriented simulation tool for integrated engine/transmission control using MATLAB/SIMULINK," Proceedings of the IASTED International Conference on Control (IASTED CONTROL '97), Cancun, Mexico, pp. 404-407, May 28-31, 1997.
[22] Sohn, S. C., Kim, Y. M., and Hong, K.-S., "Nonlinear control of an underactuated mechanical system: Partial feedback linearization and energy based Lyapunov function," Proceedings of the 2nd Asian Control Conference, Seoul, Korea, vol. II, pp. 827-830, July 22-25, 1997.
[23] Hong, K.-S., Kim, Y. M., and Kim, D. K., "Inverse kinematics of a reclaimer: Kinematic redundancy and two approaches for solutions," Proceedings of the 2nd Asian Control Conference, Seoul, Korea, pp. 863-866, July 22-25, 1997.
[24] Yang, K. J., Choi, J. W., and Hong, K.-S., "Advanced sliding mode idle speed control for a nonlinear engine mode: Coordinated throttle/spark advance control," Proceedings of the 36th SICE Annual Conference (SICE '97), Tokushima, Japan, pp. 1301-1304, July 29-31, 1997.
[25] Choi, J. W., Hong, K.-S., Yoo, W. S., Lee, M. H., Jeon, D. S., and Shin, S. Y., "Eigenstructure assignment methodology with application to automotive active suspension control," Proceedings of the 36th SICE Annual Conference (SICE '97), Tokushima, Japan, pp. 983-988, July 29-31, 1997.
[26] Lee, K. R., Hong, K.-S., and Lee, K. I., "Vibrational control of an underactuated mechanical system," Proceedings of the 12th Korea Automatic Control Conference, Seoul, pp. 151-154, October 17-18, 1997.
[27] Kim, Y. M., Hong, K.-S., and Lee, K. I., "Nonlinear control of the residual sway of a container crane in the perspective of controlling an underactuated mechanical system," Proceedings of the 12th Korea Automatic Control Conference, Seoul, pp. 249-252, October 17-18, 1997.
[28] Hong, K.-S., Kim, J. H., and Lee, K. I., "Control of a container crane: Fast traversing, and residual sway control from the perspective of controlling an underactuated systems," Proceedings of the American Control Conference, Philadelphia, PA, pp. 1294-1298, June 24-26, 1998.
[29] Hong, K.-S., Kim, S. H., and Lee, K. I., "An integrated control of strip casting process by decentralization and optimal supervision," Proceedings of the American Control Conference, Philadelphia, PA, pp. 723-727, June 24-26, 1998.
[30] Hong, K.-S., Lee, K. R., and Lee, K. I., "Vibrational control of underactuated mechanical systems: Control design through the averaging analysis," Proceedings of the American Control Conference, Philadelphia, PA, pp. 3482-3486, June 24-26, 1998.
[31] Hong, K.-S., Kim, S. H., and Lee, K. I., "An integrated control of strip casting process by decentralization and optimal supervision," Proceedings of the 1st Conference of the Technical Society of Steel Process Control of the ICASE, PackAm, pp. 10-13, September 26, 1998.
[32] Jeon, D. S., Hong, K.-S., Shin, S. Y., and Yoo, W. S., "A new model and an optimal pole-placement control for the suspension system of MacPherson type," Proceedings of the 13th Korea Automatic Control Conference, Pusan National University, Korea, vol. I, pp. 913-916, October 15-17, 1998.
[33] Yang, K. J., Hong, K.-S., and Lee, K. I., "An object-oriented modular simulation model for integrated gasoline engine and automatic transmission control," Proceedings of the 13th Korea Automatic Control Conference, Pusan National University, Korea, vol. II, pp. 1449-1452, October 15-17, 1998.
[34] Hong, K.-S., "Adaptive control of a time-varying parabolic system: Averaging analysis," Proceedings of the 13th Korea Automatic Control Conference, Pusan National University, Korea, vol. II, pp. 1999-2002, October 15-17, 1998.
[35] Fang, T. H., Choi, J. W., and Hong, K.-S., "Maneuvering target tracking using error monitoring," Proceedings of the 13th Korea Automatic Control Conference, International Session, Pusan National University, Korea, pp. 329-333, October 15-17, 1998.
[36] Hong, K.-S., Yang, K. J., and Lee, K. I., "An object-oriented modeling and control for gasoline engine and automatic transmission systems," 1999 SAE International Congress and Exposition, Transmission and Driveline Systems Symposium (SP-1440), SAE Paper no. 1999-01-0750, Detroit, Michigan, pp. 135-142, March 1-4, 1999.
[37] Hong, K.-S., Jeon, D. S., Yoo, W. S., Sunwoo, H., Shin, S. Y., Kim, C. M., and Park, B. S., "A new model and an optimal pole-placement control for the MacPherson suspension system," 1999 SAE International Congress and Exposition, Steering and Suspension Technology Symposium (SP-1438), SAE Paper no. 1999-01-1331, Detroit, Michigan, pp. 267-276, March 1-4, 1999.
[38] Choi, J. W., Fang, T. H., and Hong, K.-S., "Perception net based maneuvering target tracking," Proceedings SPIE's 13th Annual International Symposium on Aerospace/Defence Sensing, Simulation, and Control, Orlando, FL, pp.199-208, April 5-9, 1999.
[39] Hong, K.-S., Kim, S. H., and Lee, K. I., "Control of reclaimer: Kinematics, modeling, identification, and robust Smith predictor," Proceedings of the 14th World Congress of IFAC, Beijing, China, Preprint Number N-7b-01-6, vol. N, pp. 409-414, July 5-9, 1999.
[40] Hong, K.-S., Solo, V., and Bentsman, J., "Adaptive control of a time-varying parabolic system: Averaging analysis," Proceedings of the 14th World Congress of IFAC, Beijing, China, Preprint Number E-2c-16-1, vol. E, pp. 351-356, July 5-9, 1999.
[41] Hong, K.-S., Sohn, H. C., and Lee, K. I., "Vibrational control of an underactuated mechanical system: Control design through averaging analysis," Proceedings of the 14th World Congress of IFAC, Beijing, China, Preprint Number C-2a-04-1, vol. C, pp. 109-114, July 5-9, 1999.
[42] Hong, K.-S., Jeon, D. S., and Sohn, H. C., "A new modeling of the Macpherson suspension system and its optimal pole-placement control,” Proceedings of the 7th IEEE Mediterranean Conference on Control and Automation, Haifa, Israel, pp. 559-579, June 28-30, 1999.
[43] Hong, K.-S. and Yang, K. J., "An object-oriented modular simulation model for integrated gasoline engine and automatic transmission control," Proceedings of the 7th IEEE Mediterranean Conference on Control and Automation, Haifa, Israel, pp. 234-254, June 28-30, 1999.
[44] Hong, K.-S., Solo, V., and Bentsman, J., "Adaptive control of a time-varying parabolic system: Averaging analysis," Proceedings of the 7th IEEE Mediterranean Conference on Control and Automation, Haifa, Israel, pp. 2207-2221, June 28-30, 1999.
[45] Choi, J. W., Fang, T. H., and Hong, K.-S., “Maneuvering target tracking using error monitoring and recovery technique in cluttered environment,” Proceedings of the 1999 AIAA Guidance, Navigation, and Control Conference, Portland, OR, U.S.A., pp.1783-1792, August 9-11, 1999.
[46] Lee, M. H., Hong, K.-S., Choi, Y. K., Chung, S. H., Baek, K. R., Yoon, Y. J., and Huh N., “Implementation of an angle measurement system for an anti-sway crane system,” Proceedings of the Recent Advances in Mechatronics, Istanbul, Turkey, pp. 361-371, May 24-26, 1999.
[47] Hong, K.-S. and Kang, D. H., “Reclaimer control: Modeling, identification, and a robust Smith predictor,” Proceedings of the 1999 IEEE/RSJ International Conference on Intelligent Robots and Systems, Kyongju, Korea, vol. 1, pp.344-349, October 17-21, 1999.
[48] Kim J. G., Hong, K.-S., and Kang, D. H., “Manipulability analysis of a parallel machine tool: Optimal link parameter design,” Proceedings of the 1999 International Conference on Mechatronics Technology, Pusan, Korea, pp. 78-83, October 21-23, 1999.
[49] Hong, K.-S. and Yang, K. J., “Model reference adaptive control for a slowly time-varying parabolic system: Stability and averaging analysis,” Proceedings of the 1999 International Conference on Mechatronics Technology, Pusan, Korea, pp. 112-117, October 21-23, 1999.
[50] Kang, D. H., Hong, K.-S., and Kim, J. G., “Adaptive control of the atomic force microscope of tapping mode,” Proceedings of the 1999 International Conference on Mechatronics Technology, Pusan, Korea, pp. 134-139, October 21-23, 1999.
[51] Hong, K.-S. and Yang, K. J., “Partial convergence of coupled time-varying systems,” Proceedings SYSID 2000: 12th IFAC Symposium on System Identification, vol. 1, pp. 397-402, Santa Barbara, CA, June 21-23, 2000.
[52] Hong, K.-S., Kang, D. H., and Kim, J. G., “Robust Smith predictor design via uncertainty quantification: Application to a reclaimer,” Proceedings SYSID 2000: 12th IFAC Symposium on System Identification, vol. 2, pp. 575-580, Santa Barbara, CA, June 21-23, 2000.
[53] Sohn, H. C., Hong, K.-S., and Hedrick, J. K., “Semi-active control of the Macpherson suspension system: Hardware-in-the-loop simulations,” IEEE International Conference on Control Application & IEEE International Symposium on CACSD, Anchorage, AK, USA, vol. WP4-6, pp. 982-987, September 25-27, 2000.
[54] Park, B. J., Hong, K.-S., and Huh, C. D., “Time-efficient input shaping control of container crane systems” IEEE International Conference on Control Application & IEEE International Symposium on CACSD, Anchorage, AK, USA, vol. MA4-6, pp. 80-85, September 25-27, 2000.
[55] Hong, K.-S., Sohn, H. C., and Hedrick, J. K., “Modified Skyhook control for the semi-active Macpherson strut suspension: A new model and HILS,” ASME International Mechanical Engineering Congress & Exposition 2000, Orlando, Florida, USA, vol. 69-1, pp. 559-566, November 5-10, 2000.
[56] Kim, Y. S. and Hong, K.-S., “Stability of the modified probabilistic data association filter: Lyapunov function based analysis,” 39th IEEE Conference on Decision and Control, Sydney, Australia, pp. 3896-3901, December 12-15, 2000.
[57] Yang, K. J. and Hong, K.-S., “Model reference adaptive control of a flexible structure,” 32th International Symposium on Robotics, Seoul, Korea, FE5-1, pp. 1362-1367, April 19-21, 2001.
[58] Hong, K.-S., Kim, J. G., and Lee, S. H., “Optimal link design of a parallel machine tool based on manipulability analysis,” 6th IEEE International Symposium on Industrial Electronics, Pusan, Korea, pp. 1747-1752, June 12-16, 2001.
[59] Kim, Y. S., Choi, S. L., and Hong, K.-S., “A suboptimal algorithm for the optimal Bayesian filter using receding horizon FIR filter,” 6th IEEE International Symposium on Industrial Electronics, Pusan, Korea, pp. 1860-1865, June 12-16, 2001.
[60] Hong, K.-S., Kim, J. G., Huh, C. D., Choi, K. H., and Lee, S., “A PC-based open robot control system: PC-ORC,” 6th IEEE International Symposium on Industrial Electronics, Pusan, Korea, pp. 1901-1906, June 12-16, 2001.
[61] Yang, K. J. and Hong, K.-S., “Model reference adaptive control of a cantilevered flexible beam,” Proceedings of the SICE/ICASE Joint Workshop-Control Theory and Applications, Nagoya University, Nagoya, Japan, pp. 1-6, July 24, 2001.
[62] Kim, Y. S. and Hong, K.-S., “Lyapunov stability of a tracking filter with the uncertainty of measurement origin,” Proceedings of the 40th SICE Annual Conference (SICE 2001), Nagoya, Japan, pp. 304-309, July 25-27, 2001.
[63] Yang, K. J., Hong, K.-S., and Lee, S. H., “Robust MRAC of a linear time-varying parabolic system with bounded disturbance,” IFAC Workshop on ALCOSP2001, Como, Italy, pp. 31-36, August 29-31, 2001.
[64] Sohn, H. C., Hong, K.-S., Yoo, W. S., and Lim, O. K., “A road-adaptive LQG control for semi-active suspension system,” IFAC Workshop on ALCOSP2001, Como, Italy, pp. 371-376, August 29-31, 2001.
[65] Yoo, W. S., Sohn, J. H., Lim, O. K., and Hong, K.-S., “Velocity transformation matrix of a revolute-spherical massless link,” Proceedings of DETC’01 ASME 2001 Design Engineering Technical Conference and Computers and Information in Engineering Conference, Pittsburgh, PA, 7pages, September 9-12, 2001.
[66] Choi, J. Y. and Hong, K.-S., “Vibration control of an axially moving belt by a nonlinear boundary control,” International Conference on Control, Automation and Systems, Cheju National University, Jeju Island, Korea, pp. 1322-1325, October 17-21, 2001.
[67] Sohn, H. C., Hong, K. T., and Hong, K.-S., “Adaptive LQG control for semi-active suspension system: Disturbance rejection capability,” International Conference o n Control, Automation and Systems, Cheju National University, Jeju Island, Korea, pp. 398-401, October 17-21, 2001.
[68] Choi, J. Y., Hong, K.-S., and Huh, C. D., “Vibration control of an axially moving strip by a non-linear boundary control,” 15th Triennial World Congress of the International Federation of Automatic Control, T-Tu-E19-1, Barcelona, Spain, July 21-26, 2002.
[69] Huh, C. D. and Hong, K.-S., “Input shaping control of container crane systems: Limiting the transient sway angle,” 15th Triennial World Congress of the International Federation of Automatic Control, T-Th-E21, Barcelona, Spain, July 21-26, 2002.
[70] Kim, Y. S., Hong K.-S., and Huh, C. D., “A suboptimal algorithm of the optimal Bayesian filter based upon the receding horizon strategy,” 15 Triennial World Congress of the International Federation of Automatic Control, T-Mo-M01-2, Barcelona, Spain, July 21-26, 2002.
[71] Yang, K. J. and Hong, K.-S., “Robust boundary control of an axially moving steel strip,” 15th Triennial World Congress of the International Federation of Automatic Control, T-Tu-E19-2, Barcelona, Spain, July 21-26, 2002.
[72] Lee, S. H., Hong, K.-S., and Choi, C., “Task-based optimal design of a Stewart platform manipulator: A new rolling mill,” The 4th Asian Control Conference, Singapore, pp. 1547-1552, September 25-27, 2002.
[73] Lee, J. H. and Hong, K.-S., “Manipulability analysis of a new parallel rolling mill based upon two Stewart platforms,” ICCAS, Muju Resort, Jeonbuk, Korea, pp. 2112-2118, Oct. 16-19, 2002.
[74] Hong, K.-S., Choi, J. Y., and Park, S. K., “ Boundary control of an axially moving system,” Proceedings of the ICCAS/SICE Workshop Intelligent Control and Systems-, Muju Resort, Jeonbuk, Korea, pp. 210-215, October 16, 2002.
[75] Choi, J. Y., Hong, K.-S., and Hong, K. T., “Exponential stabilization of an axially moving tensioned strip by passive damping and boundary control,” 2nd IFAC Conference on Mechatronic Systems, Berkeley, California, USA, pp. 23-28, December 9-11, 2002.
[76] Hong, K. T., Hong, K.-S., and Yang, K. J., “Engine-transmission control for smooth shifting using a robust adaptive scheme with intelligent supervisor,” 2nd IFAC Conference on Mechatronic Systems, Berkeley, California, USA, pp. 370-375, December 9-11, 2002.
[77] Yang, K. J., Matsuno, F., and Hong, K.-S., “Robust boundary control of an axially moving string by using a PR-like transfer function,” Proceedings of the 42th SICE Annual Conference (SICE2003), Fukui University, Fukui, Japan, pp. 1480-1485, August 4-6, 2003.
[78] Kim, Y. S. and Hong, K.-S., “Decentralized information filter in federated form,” Proceedings of the 42th SICE Annual Conference (SICE2003), Fukui University, Fukui, Japan, pp. 2025-2030, August 4-6, 2003.
[79] Hong, K. T., Hwang, S. H., and Hong, K.-S., “Automotive ride-comfort improvement with an air cushion seat,” Proceedings of the 42th SICE Annual Conference (SICE2003), Fukui University, Fukui, Japan, pp. 2043-2048, August 4-6, 2003.
[80] Lee, J. H. and Hong, K.-S., “Kinematic optimal design of a new rolling mill: Two SPs approach,” Preprints of IFAC Workshop on New Technologies for Automation of Metallurgical Industry, Shanghai, P. R. China, pp. 173-178, Oct. 11-13, 2003.
[81] Hwang, S. H., Hong, K.-S., and Hong, K. T., “Modified Smith predictor design for a reclaimer,” Preprints of IFAC Workshop on New Technologies for Automation of Metallurgical Industry, Shanghai, P. R. China, pp. 185-190, Oct. 11-13, 2003.
[82] Kim, C. W., Hong, K.-S., and Kim, Y. S., “Vibration control of an axially moving string: Inclusion of the dynamics of electro hydraulic servo system,” Proceedings of the International Conference on Control, Automation, and Systems, Gyeongju TEMF Hotel, Gyeongju, Korea, pp. 342-347, Oct. 22-25, 2003.
[83] Yang, K. J., Hong, K.-S., and Matsuno, F., “The rate of change of an energy functional for axially moving continua,” Proceedings of the International Conference on Control, Automation, and Systems, Gyeongju TEMF Hotel, Gyeongju, Korea, pp. 2707-2712, Oct. 22-25, 2003.
[84] Kim, C. W. and Hong, K.-S., “Boundary control of an axially moving system: String case with actuator dynamics,” The Eighth PNU-IIS Joint Workshop, IIS, The University of Tokyo, Tokyo, Japan, pp. 7-16, Dec. 15-16, 2003.
[84-1] Kang, M. W., Hong, K. T., and Hong, K.-S., “Kinematic optimal design of a paramill: a multi-SP device,” The Second PNU-ZJU Joint Workshop, Pusan National Univ., Busan, Korea, pp. 187-201, May 3-4, 2004.
[85] Kim, C. W., Hong, K.-S., and Lodewijks, G., “Anti-sway control of container cranes: An active mass-damper approach,” Proceedings of the SICE Annual Conference in Sapporo, Hokkaido Institute of Technology, Japan, pp. 939-944, August 4-6, 2004.
[86] Park, H. and Hong, K.-S., “Boundary control of container crane: Two-stage control of a container crane as nonflexible and flexible cable,” Proceedings of the International Conference on Control, Automation, and Systems, The Shangri-La Hotel, Bangkok, Thailand, pp. 153-158, Aug. 25-27, 2004.
[87] Kim, Y. S., Hong, K.-S., and Sul, S. K., “Anti-sway control of container cranes: Inclinometer, observers, and state feedback,” Proceedings of the International Conference on Control, Automation, and Systems, The Shangri-La Hotel, Bangkok, Thailand, pp. 1365-1370, Aug. 25-27, 2004.
[88] Kim, Y.-S. and Hong, K.-S., “A nonlinear information filter for tracking maneuvering vehicles in an adaptive cruise control environment,” Proceedings of the International Conference on Control, Automation, and Systems, The Shangri-La Hotel, Bangkok, Thailand, pp. 1669-1674, Aug. 25-27, 2004.
[89] Kim, C. W., Hong, K.-S., and Lodewijks, G., “Anti-sway control of container cranes as a flexible cable cystem,” Proceedings IEEE Conference on Control Applications, Taipei, Taiwan, pp. 1564-1569, September 2-4, 2004.
[90] Hong, K. T. and Hong, K.-S., “Input shaping and VSC of container cranes,” Proceedings IEEE Conference on Control Applications, Taipei, Taiwan, pp. 1570-1575, September 2-4, 2004.
[91] Yang, K. J., Hong, K.-S., and Matsuno, F., “Robust adaptive control of nonlinear translating beams with a varying speed,” Proceedings of the 2004 FIRA Robot World Congress, Busan, Korea, Oct. 26-29, 2004.
[92] Kim, Y. S. and Hong, K.-S., “A tracking algorithm for autonomous navigation of AGVs in a container terminal,” Proceedings of the 30th Annual Conference of the IEEE Industrial Electronics Society, Busan, Korea, pp. 401-406, November 2-6, 2004.
[93] Kim, D. H., Park, J. Y., Kim, B. K., and Hong, K.-S., “AFM-based identification of the dynamic properties of globular proteins,” Proceedings of the 30th Annual Conference of the IEEE Industrial Electronics Society, Busan, Korea, pp. 1582-1587, November 2-6, 2004.
[94] Lee, C., Chang, Y, Park, G. Ryu, J, Jeong, S.-G. Park, S., Park, J. W., Lee, H. C., Hong, K.-S., and Lee M. H., “Indoor positioning system based on incident angles of infrared emitters,” Proceedings of the 30th Annual Conference of the IEEE Industrial Electronics Society, pp. 2218-2222, Busan, Korea, November 2-6, 2004.
[95] Kim, C. S., Park, J.-H., Hong, K.-S., and Lee, M. H., “Improving odometry accuracy for car-like vehicles by using tire Radii measurements,” Proceedings of the 30th Annual Conference of the IEEE Industrial Electronics Society, Busan, Korea, pp. 2546-2551, November 2-6, 2004.
[96] Kim, C.-S., Hong, K.-S., and Han, H. Y.-S., “PC-base off-line programming using VRML for welding robots in a shipbuilding,” Proceedings of the 2004 IEEE Conference on Robotics, Automation and Mechatronics (RAM), Singapore, pp. 949-954, December 1-3, 2004.
[97] Lee, H. C., Kim, C. S., Hong, K.-S., and Lee, M. H., "Improving odometry accuracy for a car using tire Radii measurements," Proceedings of the 10th International Symposium on Artificial Life and Robotics, B-Con Plaza, Beppu, Oita, Japan, pp. 603-606, February 4-6, 2005.
[98] Lee, J.-H., Hong, K.-T., Oh, S.-M., and Hong, K.-S., “An industrial manipulator for shipbuilding: Off-line programming and open architecture,” Proceedings of the International Conference on Control, Automation, and Systems, KINTEX, Gyeonggi-do, Korea, pp. 397-402, June 2-5, 2005.
[99] Park, H. and Hong, K.-S., “Sway control of container cranes as an axially moving nonlinear string,” Proceedings of the International Conference on Control, Automation, and Systems, KINTEX, Gyeonggi-do, Korea, pp. 2474-2479, June 2-5, 2005.
[100] Kim, C.-W., Hong, K.-S., and Park, H., “Boundary control of a tensioned elastic axially moving string,” Proceedings of the International Conference on Control, Automation, and Systems, KINTEX, Gyeonggi-do, Korea, pp. 2260-2265, June 2-5, 2005.
[101] Hong, K.-S. and Park, H., “Boundary control of container cranes as an axially moving string system,” Proceedings of the 16th IFAC World Congress, Prague, Czech Republic, pp. 132-137 ( Tu-M01-TP/8), July 4-8, 2005.
[102] Kim, Y. S. and Hong, K.-S., “Federated information mode-matched filter in AMM algorithm,” Proceedings of the 16th IFAC World Congress, Prague, Czech Republic, pp. 156-161 (We-E04-TP/5), July 4-8, 2005.
[103] Yang, K. J., Hong, K.-S., and Matsuno, F., “The rate of change of an energy functional for axially moving continua,” Proceedings of the 16th IFAC World Congress, Prague, Czech Republic, pp. 610-615 (Th-A08-TO/6), July 4-8, 2005.
[104] Yang, K. J., Hong, K.-S., and Matsuno, F., “Robust adaptive control of nonlinear translating beams with a varying speed,” Proceedings of the 16th IFAC World Congress, Prague, Czech Republic, pp. (We-A04-TP/12), July 4-8, 2005.
[105] Chwa, D. and Hong, K.-S., “Nonlinear control of 3-D overhead cranes: Energy-based decoupling,” Proceedings of the 16th IFAC World Congress, Prague, Czech Republic, pp. 275-280 (We-A04-TP/9), July 4-8, 2005.
[106] Park, H. and Hong, K.-S., “Boundary control of container cranes,” Proc SPIE Int Soc Opt Eng, (& Proc. 3rd International Conference on Mechatronics and Information Technology), vol. 6042, 604210 (1-6), Chongqing, China, September 21-23, 2005.
[107] Jeon, S. Y., Kim, H. J., Hong, K.-S., and Kim, B. K., “Reactive layer control architecture for autonomous mobile robots,” Proc SPIE Int Soc Opt Eng (& Proceedings of the 3rd International Conference on Mechatronics and Information Technology ), Chongqing, China, vol. 6042, 60423T (1-6), September 21-23, 2005.
[108] Park, D.-W., Yoo. W.-S., Kim, M.-S., Hong, K.-T., and Hong, K.-S., "Ride comfort values of four Korean cars in highways," Proceedings of ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, DETC2005-84176, Long Beach, CA, USA, pp.1-6, September 24-28, 2005.
[109] Sohn, W.-J., Hong, K.-S., Song, J.-B., and Choi, K.-H., “Mobile robot control architecture for reflexive avoidance of moving obstacles,” The 6th Asian Control Conference 2006, pp. 937-945, Bali, Indonesia, July 18-21, 2006.
[110] Hong, K. T., Kim, C. S., Kim, R. K., and Hong, K.-S., “Fast traveling and residual sway control of container cranes: Comparing of ODE and PDE approaches,” The 6th Asian Control Conference 2006, pp. 722-730, Bali, Indonesia, July 18-21, 2006.
[111] Hong, K.-T., Park, H., Kim, C.-S., and Hong, K.-S., “Double-stage control for container cranes: Fast traveling and residual vibration control,” Proceedings of Asian Conference on Multibody Dynamics, University of Tokyo, pp. A00584(8), August 2-4, 2006.
[112] Park, H. and Hong, K.-S., “Vibration control of axially moving system with variable speed, tension and length,” SICE-ICCAS International Joint Conference 2006, pp. 67-72, Busan, Korea, October 18-21, 2006.
[113] Sohn, W. J. and Hong, K.-S., “Moving obstacle avoidance using a LRF sensor,” SICE-ICCAS International Joint Conference 2006, pp. 5957-5962, Busan, Korea, October 18-21, 2006.
[114] Hong, K.-T., Kim. R. K., Kim, T. S., and Hong, K.-S., "Input shaping control for limiting the transient sway angle of cranes," Proceedings of International Conference for Mechanical and Automotive Technologies 2006, pp. 393-398, Chonbuk National University, Jeonju, Korea, April 26-28, 2006.
[115] Kim, T. S., Hong, K.-S., and Kim, R. K., “Modified sensitivity control of a semi-active suspension system with MR-damper for ride comfort,” Proceedings of the 8 th Cross Straits Symposium on Materials, Energy and Environmental Sciences, pp. 211-212, Pusan National Univ., Busan, Korea, November 9, 2006.
[116] Hong, K.-S., Kim, T. S., and Kim, R. K., "Control of a MR damper semi-active suspension system," Proceedings of International Symposium on Humanized Systems, pp. 75-78, Muroran, Japan, Sep. 13-15, 2007.
[117] Sohn, W.-J., Tamba, T. A., Hong, K.-S., and Kim, R.-K., "Control architecture and obstacle avoidance for acquiring the realtimeness," Proceedings of International Conference on Control, Automation, and Systems, pp. 212-217, COEX, Seoul, Korea, Oct. 17-20, 2007.
[118] Hong, K.-S., Kim, T.-S., and Kim, R.-K., "Sensitivity control of a semi-active suspension system equipped with MR-dampers," Proceedings of International Conference on Control, Automation, and Systems, pp. 262-267, COEX, Seoul, Korea, Oct. 17-20, 2007.
[119] Kim, R.-K. and Hong, K.-S., "Skyhook control using a full-vehicle model and four-relative displacement sensors," Proceedings of International Conference on Control, Automation, and Systems, pp. 268-272, COEX, Seoul, Korea, Oct. 17-20, 2007.
[120] Kim, C.-S., Hong, K.-S., Yoo, W.-S., and Park, Y.-W., "Tire-road friction estimation for enhancing the autonomy of wheel-driven vehicles," Proceedings of International Conference on Control, Automation, and Systems, pp. 273-277, COEX, Seoul, Korea, Oct. 17-20, 2007.
[121] Turnip, A., Nazaruddin, Y. Y., and Hong, K.-S., "Model reference adaptive control of an active suspension system," Proceedings of the First International Symposium on Advanced Vehicle Engineering, pp. 71-76, Grand Hotel, Busan, Korea, Feb. 21-23, 2008.
[122] Oh, D. M., Turnip, A., and Hong, K.-S., "Control strategies of a semi-active suspension system using four relative displacement sensors," Proceedings of the First International Symposium on Advanced Vehicle Engineering, pp. 94-99, Grand Hotel, Busan, Korea, Feb. 21-23, 2008.
[123] Turnip, A., Hong, K.-S., and Park, S. H., "Control of a semi-active MR-damper suspension system: A new polynomial model," Proceedings of the 17th World Congress, The International Federation of Automatic Control, pp. 4683-4688, COEX, Seoul, Korea, July 6-11, 2008.
[124] Tamba, T. A., Hong, K.-S., and Tjokronegoro, H. A., "Time-varying feedback control of and unmanned autonomous industrial forklift," Proceedings of the 17th World Congress, The International Federation of Automatic Control, pp. 8582-8587, COEX, Seoul, Korea, July 6-11, 2008.
[125] Bui, Q. T. T., Cat, P. T., and Hong, K.-S., "Development of an electronic simulator named ‘MPDT’ for control education," Proceedings of the 17th World Congress, The International Federation of Automatic Control, pp. 9791-9796, COEX, Seoul, Korea, July 6-11, 2008.
[126] Haryanto, A., Siregar, P., Kurniadi, D., and Hong, K.-S., "Development of integrated Alstom gasification simulator for implementation using DCS CS3000," Proceedings of the 17th World Congress, The International Federation of Automatic Control, pp. 10851-10856, COEX, Seoul, Korea, July 6-11, 2008.
[127] Widyotriatmo, A., Tjokronegoro, H. A., and Hong, K.-S., "A nonwhitening post filter to improve the performance of sound source separation," Proceedings of the IEEE International Conference on Industrial Informatics, pp. 599-603, DCC, Daejeon, Korea, July 13-16, 2008.
[128] Kim, C.-S., Hong, K.-S., Yoo, W.-S., and Park, Y.-W., "Tire-road friction estimation for a wheel-driven field robot," Proceedings of SICE Annual Conference, pp. 782-787, The University Electro-Communications, Chofu, Japan, August 20-22, 2008.
[129] Widyotriatmo, A. and Hong, K.-S., "Decision making framework for autonomous vehicle navigation," Proceedings of SICE Annual Conference, pp. 1002-1007, The University Electro-Communications, Chofu, Japan, August 20-22, 2008.
[130] Tamba, T. A., Bui, Q. T. T., and Hong, K.-S., "Trajectory generation of an unmanned forklift for autonomous operation in material handling system," Proceedings of SICE Annual Conference, pp. 1800-1805, The University Electro-Communications, Chofu, Japan, August 20-22, 2008.
[131] Kim, D. W., Hong, K.-S., and Jung, I. H., "Stabilization for the nonlinear beam equation," Proceedings of SICE Annual Conference, pp. 1895-1899, The University Electro-Communications, Chofu, Japan, August 20-22, 2008.
[132] Haryanto, A., Hong, K.-S., and Jeon, C. H., "Nonlinear model predictive control of an oxy-fuel combustion boiler for regulating the excess oxygen percentage in the flue gas," Proceedings of SICE Annual Conference, pp. 2112-2117, The University Electro-Communications, Chofu, Japan, August 20-22, 2008.
[133] Ngo, Q. H., Hong, K.-S., Kim, K. H., Shin, Y. J., and Choi, S.-H, "Skew control of a container crane," Proceedings of International Conference on Control, Automation, and Systems, pp. 1490-1494, COEX, Seoul, Korea, Oct. 14-17, 2008.
[134] Bui, T. T. Q., Pham, T. C., and Hong, K.-S., "Detection and classification of pills moving at a very high speed using a Bi-IV2 vision system," Proceedings of International Conference on Control, Automation, and Systems, pp. 1573-1578, COEX, Seoul, Korea, Oct. 14-17, 2008.
[135] Tamba, T. A. and Hong, K.-S., "A path following control of an unmanned autonomous industrial forklift," Proceedings of 2008 International Conference on Humanized Systems, pp. 158-163, Beijing, China, Oct. 18-22, 2008.
[136] Ngo, Q. H. and Hong, K.-S., “Adaptive boundary control of an axially moving string system: Application to container cranes,” Proceedings of IEEE International Symposium on Industrial Electronics, pp. 2121-2125, Seoul, Korea, July 5-8, 2009.
[137] Bui, T. T. Q. and Hong, K.-S., “A comparison of using probabilistic motion models for mobile robot pose estimation,” Proceedings of ICROS-SICE International Joint Conference 2009, pp. 528-532, Fukuoka, Japan, Aug. 18-21, 2009.
[138] Nguyen, Q. C., Ngo, Q. H., and Hong, K.-S., “Active vibration control of an axially moving beam using varying velocity method,” Proceedings of ICROS-SICE International Joint Conference 2009, pp. 287-292, Fukuoka, Japan, Aug. 18-21, 2009.
[139] Nguyen, Q. C., Ngo, Q. H., and Hong, K.-S., “Adaptive control of an axially moving string under spatiotemporally varying tension via a hydraulic actuator,” Proceedings of ICROS-SICE International Joint Conference 2009, pp. 293-297, Fukuoka, Japan, Aug. 18-21, 2009.
[140] Ngo, Q. H., Nguyen, Q. C., and Hong, K.-S., “Adaptive boundary control of an axially moving string under the effect of boundary disturbance,” Proceedings of ICROS-SICE International Joint Conference 2009, pp. 304-309, Fukuoka, Japan, Aug. 18-21, 2009.
[141] Nguyen, L. H., Park, S., Turnip, A., and Hong, K.-S., “Modified skyhook control of a suspension system with hydraulic strut mount,” Proceedings of ICROS-SICE International Joint Conference 2009, pp. 1347-1352, Fukuoka, Japan, Aug. 18-21, 2009.
[142] Nguyen, L. H., Park, S., Turnip, A., and Hong, K.-S., “Application of LQR control theory to the design of modified skyhook control gains for semi-active suspension systems,” Proceedings of ICROS-SICE International Joint Conference 2009, pp. 4698-4703, Fukuoka, Japan, Aug. 18-21, 2009.
[143] Turnip, A., Nguyen, L. H., and Hong, K.-S., “Detection of critical driving situations based on wheel-ground contact normal forces,” Proceedings of ICROS-SICE International Joint Conference 2009, pp. 2519-2524, Fukuoka, Japan, Aug. 18-21, 2009.
[144] Haryanto, A. and Hong, K.-S., “Parameter identification of a superheater boiler system based on Wiener-Hammerstein model using maximum likelihood Method,” Proceedings of the 7 th Asian Control Conference, pp. 1346-1351, Hong Kong Convention and Exhibition Center, Hong Kong, Aug. 27-29, 2009.
[145] Bui, T. T. Q., Widyotriatmo, A., Nguyen, L. H., and Hong, K.-S., “Sonar-based collision avoidance and probabilistic motion model for mobile robot navigation,” Proceedings of the 7 th Asian Control Conference, pp. 1462-1467, Hong Kong Convention and Exhibition Center, Hong Kong, Aug. 27-29, 2009.
[146] Hong, K.-S. and Ngo, Q. H., “Port automation: Modeling and control of container cranes (Plenary Talk),” Proceedings of the International Conference on Instrumentation, Control and Automation, pp. 19-26, Bandung, Indonesia, Oct. 20-22, 2009.
[147] Widyotriatmo, A. and Hong, K.-S., “Stabilization and path following control of an autonomous forklift,” Proceedings of the International Conference on Instrumentation, Control and Automation, pp. 104-108, Bandung, Indonesia, Oct. 20-22, 2009.
[148] Turnip, A. and Hong, K.-S., “Optimization of the dynamic behavior of semi-actively suspended road vehicles,” Proceedings of the International Conference on Instrumentation, Control and Automation, pp. 66-70, Bandung, Indonesia, Oct. 20-22, 2009.
[149] Cao, Z., Ngo, Q. H., Nguyen, Q. C., and Hong, K.-S., “Sway control of the crane mounted on a ship with rolling motion,” Proceedings of the International Conference on Mechatronics and Information Technology, pp. 430-435, Gwangju, Korea, Dec., 3-5, 2009.
[150] Turnip, A., Hong, K.-S., and Ge, S. S., “Backpropagation neural networks training for single trial EEG classification,” Proceedings of the 29 th Chinese Control Conference, pp. 2462-2476, Beijing, China, July 29-31, 2010.
[151] Hu, X. and Hong, K.-S., “Real-time functional near infrared spectroscopy based brain activation strength estimation,” Proceedings of the 29 th Chinese Control Conference, pp. 3091-3093, Beijing, China, July 29-31, 2010.
[152] Aqil, M., Hong, K.-S., and Jeong, M.-Y., “RLS estimation of fNIRS signal strength as GLM parameters, in the course of real-time brain activation detection,” Proceedings of the 29 th Chinese Control Conference, pp. 3094-3097, Beijing, China, July 29-31, 2010.
[153] Nguyen, Q. C., Ngo, Q. H., and Hong, K.-S., “Adaptive control for a rewinding process of a high-speed roll-to-roll system,” Proceedings of the 10 th International Conference on Motion and Vibration Control, pp. (2B11) 1-10, Tokyo, Japan, Aug. 17-20, 2010.
[154] Ngo, Q. H., Nguyen, Q. C., and Hong, K.-S., “Nonlinear control of an offshore container crane,” Proceedings of the 10 th International Conference on Motion and Vibration Control, pp. (1C15) 1-7, Tokyo, Japan, Aug. 17-20, 2010.
[155] Hu, X. and Hong, K.-S., “Adaptive general linear model based real-time brain activation mapping: A near-infrared spectroscopy study,” Proceedings of the International Conference on Humanized Systems 2010, pp. 114-118, Kyoto, Japan, Sep. 17-19, 2010.
[156] Nguyen, L. H. and Hong, K.-S., “ Investigation of the hemodynamic response in near infrared spectroscopy data analysis, ” Proceedings of the 2 nd International Conference on Knowledge and Systems Engineering, pp. 28-32, Hanoi, Vietnam, Oct. 7-9, 2010.
[157] Turnip, A., Hong, K.-S., Ge, S. S., and Jeong, M.-Y., “ Neural networks training based on sequential extended Kalman filtering for single trial EEG classification,” Proceedings of the 2 nd International Conference on Knowledge and Systems Engineering, pp. 85-88, Hanoi, Vietnam, Oct. 7-9, 2010.
[158] Bui, T. T. Q. and Hong, K.-S., “ Supervised learning of a color-based active basis model for object recognition, ” Proceedings of the 2 nd International Conference on Knowledge and Systems Engineering, pp. 69-74, Hanoi, Vietnam, Oct. 7-9, 2010.
[159] Nguyen, L. H. and Hong, K.-S., “ Synchronization of two uncoupled FitzHugh-Nagumo neurons via nonlinear control, ” Proceedings of the International Conference on Control, Automation and Systems, pp. 906-911, KINTEX, Korea, Oct. 27-30, 2010.
[160] Hu, X. and Hong, K.-S., “ NIRS based brain activation mapping: A real-time application, ” Proceedings of the International Conference on Control, Automation and Systems, pp. 2254-2256, KINTEX, Korea, Oct. 27-30, 2010.
[161] Aqil, M., Hong, K.-S., and Jeong, M.-Y., “ Orthogonal functions based estimation of fNIRS signal strength as GLM parameters, in the course of real-time brain activation detection, ” Proceedings of the International Conference on Control, Automation and Systems, pp. 2244-2247, KINTEX, Korea, Oct. 27-30, 2010.
[162] Widyotriatmo, A., Hong, G.-Y., and Hong, K.-S., “ Configuration control of a wheeled vehicle using vision system with limited field of view, ” Proceedings of the International Conference on Control, Automation and Systems, pp. 76-81, KINTEX, Korea, Oct. 27-30, 2010.
[163] Pamosoaji, A. K., Widyotriatmo, A., and Hong, K.-S., “ A motion planning algorithm for a nonholonomic vehicle using vector potential functions in triangular regions, ” Proceedings of the International Conference on Control, Automation and Systems, pp. 66-70, KINTEX, Korea, Oct. 27-30, 2010.
[164] Nguyen, Q. C., Ngo, Q. H., and Hong, K.-S., “ Transverse vibration control of axially moving webs by regulation of axial tension, ” Proceedings of the International Conference on Control, Automation and Systems, pp. 1936-1940, KINTEX, Korea, Oct. 27-30, 2010.
[165] Song, Q., Hong, G.-Y., and Hong, K.-S., “ Adaptive control and system optimization for a inverter heat pump, ” Proceedings of the International Conference on Control, Automation and Systems, pp. 501-506, KINTEX, Korea, Oct. 27-30, 2010.
[166] Pan, Y., Ge, S. S., Goh, Q. Z., and Hong, K.-S., “Mind robotic rehabilitation based on non-invasive motor imagery brain computer interface”, the International Conference on Social Robotics (ICSR 2010), Singapore, Nov. 23-24, 2010. (WCU)
[167] Prayudhi, L. H. and Hong, K.-S., “Map building for mobile robot based on video mosaic,” Proceedings of the 7 th I nternational Conference on Ubiquitous Robots and Ambient Intelligence, pp. 381-384, Busan, Korea, Nov. 24-27, 2010.
[168] Widyotriatmo, A. and Hong, K.-S., “ Path tracking control with slip angle adaptation of mobile robot, ” Proceedings of the 7 th I nternational Conference on Ubiquitous Robots and Ambient Intelligence, pp. 377-380, Busan, Korea, Nov. 24-27, 2010.
[169] He, W., Ge, S. S., Hang, C. C., and Hong, K.-S., “ Boundary control of a vibrating string under unknown time-varying disturbance”, the 49th IEEE Conference on Decision and Control, pp. 2584-2589, Atlanta, GA, USA, Dec. 15-17, 2010.
[170] Widyotriatmo, A. and Hong, K.-S., "A configuration control with slip angle compensation of a mobile robot," Proceedings of the 31st IASTED International Conference on Modelling, Identification, and Control, pp. 242-247, Innsbruck, Austria, Feb. 14-16, 2011.
[171] Pamosoaji, A. K. and Hong, K.-S., "Vector-potential-function-based motion planning for nonholonomic robots in a complex workspace," Proceedings of the 31st IASTED International Conference on Modelling, Identification, and Control, pp. 248-253, Innsbruck, Austria, Feb. 14-16, 2011.
[172] Haryanto, A. and Hong, K.-S., "Multi-linear MPC for nonlinear oxy-fuel combustion boiler system," Proceedings of the 31st IASTED International Conference on Modelling, Identification, and Control, pp. 84-89, Innsbruck, Austria, Feb. 14-16, 2011.
[173] Nguyen, L. H. and Hong, K.-S., “ Estimation of the hemodynamic response in near infrared spectroscopy: A linear model approach,” Proceedings of the 8th IASTED International Conference on Biomedical Engineering, pp. 24-29, Innsbruck, Austria, Feb. 16-18, 2011.
[174] Turnip, A., Hong, K.-S., and Ge, S. S., “EEG-P300 extraction using neural network based adaptive recursive filter and adaptive autoregressive models,” Proceedings of the 8th IASTED International Conference on Biomedical Engineering, pp. 36-41, Innsbruck, Austria, Feb. 16-18, 2011.
[175] Hu, X. - S., Hong, K.-S., Ge, S. S., and Jeong, M.-Y., “Extended general linear model based on-line brain activation mapping, ” IEEE Proceedings of the 8th International Symposium on Biomedical Imaging, pp. 2002-2005, Chicago, IL, USA, March 30-April 2, 2011.
[176] Pamosoaji, A. K., Hong, G.-Y, Widyotriatmo, A., and Hong, K.-S., “ Minimum-time task assignment algorithm for multiple-vehicle systems, ” Proceedings of the 8th Asian Control Conference, pp. 85-89, Kaohsiung, Taiwan, May 15-18, 2011.
[177] Rehan, M. and Hong, K.-S., “ Robust adaptive synchronization of uncoupled FitzHugh-Nagumo neurons under disturbances and uncertain external electric stimulation, ” Proceedings of the 8th Asian Control Conference, pp. 875-878, Kaohsiung, Taiwan, May 15-18, 2011.
[178] Widyotriatmo, A., Pamosoaji, A. K., and Hong, K.-S., “ Robust configuration control of a mobile robot with uncertainties, ” Proceedings of the 8th Asian Control Conference, pp. 1036-1041, Kaohsiung, Taiwan, May 15-18, 2011.
[179] Rehan, M. and Hong, K.-S., “Synchronization of multiple chaotic FitzHugh-Nagumo neurons under external electric stimulation,” Poster (6-MT) presented at the 17th Annual Meeting of the Organization for Human Brain Mapping, Quebec, Canada, June 26-30, 2011.
[180] Turnip, A., Hong, K.-S., and Jeong, M.-Y., “Real time feature extraction of EEG-based P300 using nonlinear principal component analysis,” Poster (441-WTh) presented at the 17th Annual Meeting of the Organization for Human Brain Mapping, Quebec, Canada, June 26-30, 2011.
[181] Aqil, M., Hong, K.-S., and Jeong, M.-Y., “Feature extracting design matrix by modeling the hemodynamic behavior of a brain as an LTI system,” Poster (509-WTh) presented at the 17th Annual Meeting of the Organization for Human Brain Mapping, Quebec, Canada, June 26-30, 2011.
[182] Nguyen, L. H. and Hong, K.-S., “Systemic physiological interference removal in fNIRS using multisource-detector configuration,” Poster (516-WTh) presented at the 17th Annual Meeting of the Organization for Human Brain Mapping, Quebec, Canada, June 26-30, 2011.
[183] Hu, X.-S., Hong, K.-S., Ge, S. S., and Jeong, M.-Y., “Wavelet packet entropy based brain activation mapping by near infrared spectroscopy,” Poster (527-WTh) presented at the 17th Annual Meeting of the Organization for Human Brain Mapping, Quebec, Canada, June 26-30, 2011.
[184] Pamosoaji, A. K., Widyotriatmo, A., and Hong, K.-S., “ Sensor-based planning and control algorithms for a mobile robot over a given global planning, ” Proceedings of the 30th Chinese Control Conference, pp. 3610-3614, Yantai, China, July 22-24, 2011.
[185] Hu, X.-S., Hong, K.-S., and Ge, S. S., “Neuronal optical response recognition based on chaos levels identification of near-infrared spectroscopy time series,” Proceedings of the 30th Chinese Control Conference, pp. 3218-3220, Yantai, China, July 22-24, 2011.
[186] Hu, X.-S., Hong, K.-S., and Ge, S. S., “Wavelet packet entropy based brain activation mapping using near infrared spectroscopy,” Proceedings of the 2011 International Conference on Advanced Mechatronic Systems, pp. 435-437, Zhengzhou, China, August 11-13, 2011.
[187] Nguyen, Q. C., Hong, K.-S., and Ge, S. S., “Transverse vibration control of axially moving beams by regulation of axial velocity, ” Proceedings of the 18th World Congress of the International Federation of Automatic Control, pp. 5579-5584, Milan, Italy, August 28-September 2, 2011.
[188] Zhang, S., Ge, S. S., He, W., and Hong, K.-S., “Modeling and control of a nonuniform vibrating string under spatiotemporally varying tension and disturbance, ” Proceedings of the 18th World Congress of the International Federation of Automatic Control, pp. 7678-7683, Milan, Italy, August 28-September 2, 2011.
[189] Nguyen, Q. C. and Hong, K.-S., “Longitudinal and transverse vibration control of an axially moving string,” Proceedings of the 5 th International Conference on Cybernetics and Intelligence Systems and on Robotics, Automation and Mechatronics, pp. 24-29, Qingdao, China, September 17-19, 2011.
[190] Pomosoaji, A. K. and Hong, K.-S., “Collision-free path and trajectory planning algorithm for multiple-vehicle systems,” Proceedings of the 5 th International Conference on Cybernetics and Intelligence Systems and on Robotics, Automation and Mechatronics, pp. 67-72, Qingdao, China, September 17-19, 2011.
[191] Hu, X.-S. Hong, K.-S., and Ge, S. S., “Brain computer interface based on nonlinear characteristics identification of neuronal activities evoked optical properties,” Proceedings of the 5 th International Conference on Cybernetics and Intelligence Systems and on Robotics, Automation and Mechatronics, pp. 226-228, Qingdao, China, September 17-19, 2011.
[192] Nguyen, L. H. and Hong, K.-S., “Analysis and control of the bifurcation in a Morris-Lecar neuron via a washout filter-aided dynamic control law,” Proceedings of the International Conference on Control, Automation and Systems, pp. 342-347, KINTEX, Korea, Oct. 26-29, 2011.
[193] Turnip, A. and Hong, K.-S., “Adaptive neural network classifier for EEG signals of six mental tasks,” Proceedings of the International Conference on Control, Automation and Systems, pp. 331-336, KINTEX, Korea, Oct. 26-29, 2011.
[194] Ngo, Q. H., Yu, Y., Kim, E. H., Jang, I. G., and Hong, K.-S., “Orientation control of a crane’s spreader: Application on mobile harbor,” Proceedings of the International Conference on Control, Automation and Systems, pp. 510-515, KINTEX, Korea, Oct. 26-29, 2011.
[195] Li, X., Ge, S. S., Pan, Y., Hong, K-S., Zhang, Z., and Hu, X.-S., “Feature extraction based on common spatial analysis for time domain parameters,” Proceedings of the 8 th I nternational Conference on Ubiquitous Robots and Ambient Intelligence, pp. 377-382, Incheon, Korea, Nov. 23-26, 2011.
[196] Pamosoaji, A. K., Hong, K.-S., and Ge, S. S., “Trajectory planning and control for multiple-vehicles systems,” Proceedings of the 8 th I nternational Conference on Ubiquitous Robots and Ambient Intelligence, pp. 461-466, Incheon, Korea, Nov. 23-26, 2011.
[197] Turnip, A., Hong, K.-S., and Yoon, S., “Adaptive nonlinear principle component analysis based multilayer neural network for P300 detection,” Proceedings of 2001 IEEE/SICE International Symposium on System Integration, pp. 96-99, Kyoto, Japan, Dec. 20-22, 2011.
[198] Hu, X.-S., Hong, K.-S., and Ge, S. S., “A functional near-infrared spectroscopy based lie detector,” Proceedings of 2001 IEEE/SICE International Symposium on System Integration, pp. 130-132, Kyoto, Japan, Dec. 20-22, 2011.
[199] Ngo, Q. H., Hong, G., and Hong, K.-S., “Sway suppression of an offshore container crane,” Proceedings of 2001 IEEE/SICE International Symposium on System Integration, pp. 1388-1393, Kyoto, Japan, Dec. 20-22, 2011.
[200] Nguyen, L.H. and Hong, K.-S., “Suppression of collective synchronization in a population of globally coupled chaotic FHN neurons,” Poster (7-WT) presented at the 18th Annual Meeting of the Organization for Human Brain Mapping, Beijing, China, June 10-14, 2012.
[201] Rehan, M., Hong K.-S., and Kamran, M.A., “Synchronization of FitzHugh-Nagumo neurons using PI-based nonlinear adaptive control,” Poster (8-WT) presented at the 18th Annual Meeting of the Organization for Human Brain Mapping, Beijing, China, June 10-14, 2012.
[202] Aqil, M., Hong, K.-S., Jeong, M.-Y., and Ge, S.S., “Hemodynamic observer model for blind identification of evoked human brain activity,” Poster (766-WT) presented at the 18th Annual Meeting of the Organization for Human Brain Mapping, Beijing, China, June 10-14, 2012.
[203] Hu, X.-S., Hong, K.-S., Ge, S.S., and Naseer, N., “Spontaneous fluctuation contributed to the trail-to-trail variability in fNIRS signal,” Poster (773-WT) presented at the 18th Annual Meeting of the Organization for Human Brain Mapping, Beijing, China, June 10-14, 2012.
[204] Santosa, H., Hong, K.-S., and Lee, S.-H., “Signal to noise ratio improvement in functional NIRS signal,” Poster (780-WT) presented at the 18th Annual Meeting of the Organization for Human Brain Mapping, Beijing, China, June 10-14, 2012.
[205] Pamosoaji, A. K. and Hong, K.-S, “Time-constrained trajectory tracking control algorithm for multiple-vehicle systems,” Proceedings of 2012 IEEE International Conference on Mechatronics and Automation, pp. 1148-1153, Chengdu, China, Aug 5-8, 2012.
[206] Aqil, M., Hong, K.-S, Jeong, M.-Y, and Ge, S. S., “Online brain imaging by QR factorization of normalized regressor functions,” Proceedings of 2012 IEEE International Conference on Mechatronics and Automation, pp. 1370-1374, Chengdu, China, Aug 5-8, 2012.
[207] Hu, X.-S, Hong, K.-S., and Ge, S. S., “Independent component analysis based trial-to-trial variations reduction in fNIRS signal,” Proceedings of 2012 IEEE International Conference on Mechatronics and Automation, pp. 1429-1433, Chengdu, China, Aug 5-8, 2012.
[208] Santosa, H. and Hong, K.-S., “Improvement of signal-to-noise ratio in hemodynamic response,” Proceedings of the 8 th International Conference on Humanized Systems, pp. 137-139, Daejeon, Korea, Aug 16-18, 2012.
[209] Ngo, Q. H., Nan, Y., and Hong, K.-S., “Command shaping for vibration reduction of container cranes,” Proceedings of the 12th International Conference on Control, Automation and Systems, pp. 651-655, Jeju, Korea, Oct. 17-21, 2012.
[210] Santosa, H., Hong, K.-S., and Hu, X.-S., “Analysis of fNIRS data in the prefrontal cortex by blind separation into independent components,” Proceedings of the 12th International Conference on Control, Automation and Systems, pp. 2046-2048, Jeju, Korea, Oct. 17-21, 2012.
[211] Hu, X.-S, Hong, K.-S., and Ge, S. S., “FNIRS based functional connectivity during task state and resting state,” Proceedings of the 12th International Conference on Control, Automation and Systems, pp. 2049-2052, Jeju, Korea, Oct. 17-21, 2012.
[212] Bhutta, M. R., Hong, K.-S., and Pamosoaji, A. K., “Collision-free navigation of wheeled vehicles by gain switching,” Proceeding of the IEEE International Conference on Robotics and Artificial Intelligence, pp. 81-85, Rawalpindi, Pakistan, Oct. 22-23, 2012.
[213] Naseer, N. and Hong, K.-S., “Functional near-infrared spectroscopy based brain activity classification for development of a brain-computer interface,” Proceeding of the IEEE International Conference on Robotics and Artificial Intelligence, pp. 174-178, Rawalpindi, Pakistan, Oct. 22-23, 2012.
[214] Kamran, M. A., Hong, K.-S., and Mannan, M. M. N., “Identification of fNIRS based brain activity using adaptive algorithm,” Proceeding of the IEEE International Conference on Robotics and Artificial Intelligence, pp. 200-203, Rawalpindi, Pakistan, Oct. 22-23, 2012.
[215] Jillani, G., Rehan, M., and Hong, K.-S., “Anti-windup design for system with output delays subjected to input amplitude-rate-limiter,” Proceeding of the IEEE International Conference on Robotics and Artificial Intelligence, pp. x-x, Rawalpindi, Pakistan, Oct. 22-23, 2012.
[216] Bhutta, M. R. and Hong, K.-S., “Collision-free navigation of forklifts by point-of-interest switching,” Proceedings of the 9th International Conference on Ubiquitous Robots and Ambient Intelligence, pp. 272-273, Deaejeon, Korea, Nov. 26-29, 2012.
[217] Ha, S.-H., Lee, S.-H., Hamamura, M. J., Hong, K.-S., and Nalcioglu, O., " RF coil configuration study for 7T high resolution Na23 and H1 animal MRI,” Poster (2791) presented at ISMRM 21 ST Annual meeting & Exhibition, Salt lake city, Utah, USA, April 20-26, 2013.
[218] Naseer, N. and Hong, K.-S., “Functional near-infrared spectroscopy based classification of prefrontal activity for development of a brain-computer interface,” Poster (2, Room 305) presented at the 10 th Annual World Congress of Society for Brain Mapping and Therapeutics, Baltimore, Maryland, USA, May 12-14, 2013.
[219] Hu, X.-S, Hong, K.-S., and Ge, S. S., “Resting-state functional connectivity in fNIRS signal revealed by wavelet analysis,” Poster (Submission 128) presented at the 10 th Annual World Congress of Society for Brain Mapping and Therapeutics, Baltimore, Maryland, USA, May 12-14, 2013.
[220] Naseer, N. and Hong, K.-S., “Functional near-infrared spectroscopy based discrimination of mental counting and no-control state for development of a brain-computer interface,” Proceedings of 35th Annual International Conference of the IEEE EMBS, Osaka, Japan, July 3-7, 2013, pp. 1780-1783.
[221] Santosa, H. and Hong, K.-S., “Asymmetry brain function in auditory cortex: A functional near-infrared spectroscopy study,” Proceedings of 35th Annual International Conference of the IEEE EMBS, Osaka, Japan, July 3-7, 2013, pp. 1784-1786.
[222] Shah, U. H., Piao, M.-X., Jeon, J.-Y., and Hong, K.-S., "Dynamic response of an under-water fuel transfer system," Proceedings of the 13th International Conference on Control, Automation and Systems, Kimdaejung Convention Center, Gwangju, Korea, Oct. 20-23, 2013, pp. 1003-1008.
[223] Santosa, H., Hong, M. J., and Hong, K.-S., “Non-lateralization with noise in the auditory cortex: An fNIRS study,” Proceedings of the 13th International Conference on Control, Automation and Systems, Kimdaejung Convention Center, Gwangju, Korea, Oct. 20-23, 2013, pp. 1630-1632.
[224] Kamran, M. A. and Hong, K.-S., “Indirect measurement of brain activation using fNIRS,” Proceedings of the 13th International Conference on Control, Automation and Systems, Kimdaejung Convention Center, Gwangju, Korea, Oct. 20-23, 2013, pp. 1633-1636.
[225] Nguyen, H.-D. and Hong, K.-S., “Estimating hemodynamic response using recursive instrumental variable method,” Proceedings of the 13th International Conference on Control, Automation and Systems, Kimdaejung Convention Center, Gwangju, Korea, Oct. 20-23, 2013, pp. 1674-1677.
[226] Bhutta, M. R. and Hong, K.-S., “Classification of fNIRS signals for deception decoding using LDA and SVM,” Proceedings of the 13th International Conference on Control, Automation and Systems, Kimdaejung Convention Center, Gwangju, Korea, Oct. 20-23, 2013, pp. 1776-1780.
[227] Naseer, N. and Hong, K.-S., “Discrimination of right- and left-wrist motor imagery using fNIRS: Towards control of a ball-on-a-beam system,” Proceedings of the 6th International IEEE Engineering in Medicine and Biology Society conference on Neural Engineering (IEEE EMBS NER), San Diego, CA, USA, Nov. 6-8, 2013, pp. 703-706.
[228] Naseer, N. and Hong, K.-S., “Determination of temporal window size for classifying the mean value of fNIRS signals from motor imagery,” Proceedings of the 6th IEEE International Conference on Robotics, Automation and Mechatronics (RAM), Manila, Philippines, Nov. 12-15, 2013, pp. 237-240.
[229] Hong, K.-S and Santosa, H., “Current BCI technologies in brain engineering,” Proceedings of the International Conference on Robotics, Biomimetics, Intelligent Computational Systems (ROBIONETICS), Yogyakarta, Indonesia, Nov. 25-27, 2013, pp. 1-4.
[230] Santosa, H. and Hong, K.-S., “An fNIRS-based BCI for mental arithmetic task using ICA,” Proceedings of the International Conference on Robotics, Biomimetics, Intelligent Computational Systems (ROBIONETICS), Yogyakarta, Indonesia, Nov. 25-27, 2013, pp. 219-223.
[231] Bhutta, M. R. and Hong, K.-S., “A new near-infrared spectroscopy system for detection of hemoglobin and water concentration changes during a human activity,” Proceedings of the International Conference on Robotics, Biomimetics, Intelligent Computational Systems ( ROBIONETICS ), Yogyakarta, Indonesia, Nov. 25-27, 2013, pp. 224-227
[232] Shah, U. H., Piao, M.-X., Jeon, J.-Y., and Hong, K.-S., "Command shaping for suppression of end-point oscillations of a circular cylinder maneuvering under-water,” Proceedings of the 2013 CACS International Automatic Control Conference, Sun Moon Lake, Taiwan, Dec. 2-4, 2013, pp. 262-265.
[233] Bhutta, M. R. and Hong, K.-S., “Water correction algorithm to increase the signal strength of oxy and deoxy- hemoglobin in near-infrared spectroscopy signals,” Proceedings of the IEEE International Conference on Industrial Technology (ICIT) 2014, pp. 589-593, Busan, Korea, Feb. 26 - Mar. 1, 2014.
[234] Naseer, N., Hong, K.-S., Bhutta, M. R., and Khan, M. J.,“ Improving classification accuracy of covert yes/no response decoding using support vector machines: an fNIRS study,” Proceedings of the IEEE International Conference on Robotics and Emerging Allied Technologies in Engineering (iCREATE) 2014, pp. 6-9, Islamabad, Pakistan, Apr. 22-24, 2014.
[235] Bhutta, M. R., Hong, K.-S. Naseer, N., and Khan, M. J., “ Water correction algorithm to improve the classification accuracy: a near-Infrared spectroscopy study,” Proceedings of the IEEE International Conference on Robotics and Emerging Allied Technologies in Engineering (iCREATE) 2014, pp. 91-94, Islamabad, Pakistan, April 22-24, 2014.
[236] Khan, M. J., Hong, K.-S., Bhutta, M. R., and Naseer, N., “ Dual movement control command generation using prefrontal brain activity,” Proceedings of the IEEE International Conference on Robotics and Emerging Allied Technologies in Engineering (iCREATE) 2014, pp. 244-248, Islamabad, Pakistan, April 22-24, 2014.
[237] Naseer, N., Hong, K.-S., Khan, M. J., and Bhutta, M. R., “Classification of prefrontal and motor cortex activities for development of three-class fNIRS-BCI,” Presented at the 20th Annual Meeting of the Organization for Human Brain Mapping (OHBM), Poster no. 2275, Hamburg, Germany, June 8-12, 2014.
[238] Kamran, M. A., Mannan, M. M. N., and Hong, K.-S., “Adaptive mechanism for brain functional response estimation in fNIRS signal,” Poster no. 2277 presented at the 20th Annual Meeting of the Organization for Human Brain Mapping (OHBM),, Hamburg, Germany, June 8-12, 2014.
[239] Bhutta, M. R., Hong, K.-S., Naseer, N., and Khan, M. J., “Classification of lie and truth in forced choice paradigm: an fNIRS study,” Poster no. 2278 Presented at the 20th Annual Meeting of the Organization for Human Brain Mapping (OHBM), Hamburg, Germany, June 8-12, 2014.
[240] Khan, M. J., Hong, K.-S., Naseer, N., and Bhutta, M. R., “ Multi-decision detection using EEG-NIRS based hybrid brain-computer interface (BCI),” Poster no. 2279 presented at the 20th Annual Meeting of the Organization for Human Brain Mapping (OHBM), Hamburg, Germany, June 8-12, 2014.
[241] Santosa, H., Liu, X., Hong, M. J., and Hong, K.-S., “ Functional lateralization of music processing with noise in the auditory cortex: an fNIRS study,” Poster no. 2280 presented at the 20th Annual Meeting of the Organization for Human Brain Mapping (OHBM ), Hamburg, Germany, June 8-12, 2014.
[242] Nguyen, H.-D., and Hong, K.-S., “Modeling the hemodynamic response to an impulse stimulus measured by fNIRS,” Poster no. 2281 presented at the 20th Annual Meeting of the Organization for Human Brain Mapping (OHBM), Hamburg, Germany, June 8-12, 2014.
[243] Mannan, M. M. N., Kamran, M. A., and Hong, K.-S., “Decoding brain activation in fNIRS Signal using recursive algorithm,” Poster no. 2282 presented at the 20th Annual Meeting of the Organization for Human Brain Mapping (OHBM), Hamburg, Germany, June 8-12, 2014.
[244] Phan, V. D., Shah, U. H., Jeon, J.-Y. and Hong, K.-S., “Vibration suppression of a fuel rod in water using feedback linearization and input shaping control,” Proceedings of the 7th Asian Conference on Multibody Dynamics (IMSD-ACMD), pp. xx-xx, Busan, Korea, June 30-July 3, 2014.
[245] Piao, M .-X., Shah. U. H., Jeon, J. -Y. and Hong, K.-S., “Residual vibration control of underwater systems moving underwater using command shaping technique”, Proceedings of the 33 rd Chinese Control Conference (CCC), Nanjing, China, July 28-30, 2014, pp. 2161- 2166.
[246] Bhutta, M. R., Hong, K.-S., Naseer, N., and Khan, M. J., " Hemodynamic signals based lie detection using a new wireless NIRS system," Proceedings of the Annual Conference of the Society of Instrument and Control Engineers (SICE) 2014, Sapporo, Japan, September 9-12, 2014, pp. 979-984.
[247] Khan, M. J., Hong, K.-S., Naseer, N., Bhutta, M. R. and Yoon, S. H., "Hybrid EEG-NIRS BCI for rehabilitation using different brain signals," Proceedings of Annual Conference of the Society of Instrument and Control Engineers ( SICE ) 2014, Sapporo, Japan, September 9-12, 2014, pp. 1768-1773.
[248] Khan, M. J., Hong, K.-S., Naseer, N., and Bhutta, M. R., "A hybrid brain-computer interface based on common EEG and NIRS resting state for BCI" Proceedings of the 14th International Conference on Control, Automation and Systems, KINTEX, Gyeonggi-do, Korea, October 22-25, 2014, pp. 275-278 .
[249] Shah, U. H., Piao, M,-X., Jeon, J.-Y., and Hong, K.-S., “Residual vibration suppression of an under-water fuel transport system,” Proceedings of the 14th International Conference on Control, Automation and Systems, KINTEX, Gyeonggi-do, Korea, October 22-25, 2014, pp. 953-957.
[250] Shah, U. H., Piao, M.-X., Kim, G.-H., and Hong, K.-S., “Modeling and control of a nuclear power plant’s fuel transport system,” Proceedings of the 10th Asian Control Conference, Kota Kinabalu, Malaysia, May 31- June 3, 2015, pp. 1-6.
[251] Naseer, N., Hong, K.-S, Khan M. J., and Bhutta, M. R., “Analysis of classification performance of fNIRS signals from prefrontal cortex using various temporal windows,” Proceedings of the 10th Asian Control Conference, Kota Kinabalu, Malaysia, May 31- June 3, 2015, pp. 1-5.
[252] Bhutta, M. R., Hong, K.-S, Naseer, N., and Khan M. J., “Spontaneous lie detection using functional near-infrared spectroscopy in an interactive game,” Proceedings of the 10th Asian Control Conference, Kota Kinabalu, Malaysia, May 31 ~ June 3, 2015, pp. 1-5.
[253] Liu, X., Hong, K.-S, Santosa, H., and Nguyen, H. D., “Color detection in human visual cortex: An fNIRS study,” 21st Annual Meeting of the Organization for Human Brain Mapping (OHBM), Hawaii, USA, June 14-18, 2015, Poster no. 5971, pp. 1-5.
[254] Naseer, N., Hong, K.-S, Shin, Y.-I., Khan M. J., and Bhutta, M. R., “Fourclass classification of fNIRS signals for decoding answers to multiplechoice questions,” 21st Annual Meeting of the Organization for Human Brain Mapping (OHBM), Hawaii, USA, June 14-18, 2015, Poster no. 5780, pp. 1-5.
[255] Santosa, H., Nguyen, H. D., An, J., and Hong, K.-S., “Online independent component analysis for reducing the noise in fNIRS signals,” 21st Annual Meeting of the Organization for Human Brain Mapping (OHBM), Hawaii, USA, June 14-18, 2015, Poster no. 5968, pp. 1-5.
[256] Kim, G.-H., Shah, U. H., Piao, M.-X., Choi, S.-H., Kim, S.-N., and Hong, K.-S., “Dynamics and control of an overhead shuttle transport system,” IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Busan, Korea, July 7-11, 2015, pp. 1421-1426.
[257] Nguyen, H.-D., and Hong, K.-S., “Optimizing a hemodynamic model in the human motor cortex,” Proceedings of IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Busan, Korea, July 7-11, 2015, pp. 171-176.
[258] Liu, X., and Hong, K.-S, “fNIRS based color detection from human visual cortex,” Proceedings of SICE Annual Conference, Hangzhou, China, July 28-30, 2015, pp. 1425-1430.
[259] Khan, M. J., Hong, K.-S, Naseer, N., and Bhutta, M. R., “Hybrid EEG-NIRS based BCI for quadcopter control,” Proceedings of SICE Annual Conference, Hangzhou, China, July 28-30, 2015, pp. 1451-1456.
[260] Khan, M. J., Hong, K.-S, Naseer, N., and Bhutta, M. R., “Motor imagery performance evaluation using hybrid EEG-NIRS for BCI,” Proceedings of SICE Annual Conference, Hangzhou, China, July 28-30, 2015, pp. 1419-1424.
[261] Khan, M., J., Hong, K.-S., Naseer, N., and Bhutta, M. R., “Drowsiness detection in dorsolateral-prefrontal cortex using fNIRS for a passive-BCI,” Proceedings of 15th International Conference on Control, Automation and System (ICCAS), Busan, Korea, Oct. 13-16, 2015, pp. 1811-1816.
[262] Santosa, H., and Hong, K.-S., “Separation of the hemodynamic responses in a simultaneous audio-stimuli using ICA: an fNIRS study,” Proceedings of 15th International Conference on Control, Automation and System (ICCAS), Busan, Korea, Oct. 13-16, 2015, pp. 1822-1826.
[263] Nguyen, H.-D., and Hong, K.-S., “Multiple optodes configuration for measuring the absolute hemodynamic response using spatially resolved spectroscopy method: an fNIRS study,” Proceedings of 15th International Conference on Control, Automation and System (ICCAS), Busan, Korea, Oct. 13-16, 2015, pp. 1827-1832.
[264] Naseer, N., Hong, K.-S, Khan M. J., and Bhutta, M. R., “Comparison of artificial neural network and support vector machine classifications for fNIRS-based BCI,” Proceedings of 15 th International Conference on Control, Automation and System (ICCAS), Busan, Korea, Oct. 13-16, 2015, pp. 1817-1821.
[265] Bhutta, M. R., Hong, K.-S., Hong, M. J., and Kim, Y.-H., “Classification performance analysis of a combined fNIRS-polygraph system using different temporal windows,” Proceedings of 15 th International Conference on Control, Automation and System (ICCAS), Busan, Korea, Oct. 13-16, 2015, pp. 1795-1800.
[266] Pamosoaji, A. K., and Hong, K.-S., “Group-based particle swarm optimization for multiple-vehicles trajectory planning,” Proceedings of 15 th International Conference on Control, Automation and System (ICCAS), Busan, Korea, Oct. 13-16, 2015, pp. 862-867.
[267] Riaz, M., Ashraf, M., Hong, K.-S., Kim, G.-H., and Rehan, M., “Adaptive synchronization of two different chaotic systems containing mutually Lipschitz nonlinearities subject to state time-delays,” Proceedings of 15 th International Conference on Control, Automation and System (ICCAS), Busan, Korea, Oct. 13-16, 2015, pp. 60-65.
[268] Shah, U. H., Piao, M.-X., Kim, G.-H., and Hong, K.-S., “ Vibration control of a nuclear fuel rod maneuvering under water, ” Proceedings of 15 th International Conference on Control, Automation and System (ICCAS), Busan, Korea, Oct. 13-16, 2015, pp. 24-29.
[269] Lafin, H. P., Augie W., and Hong, K.-S., “ Wall following control algorithm for a car-like wheeled-mobile robot with differential-wheels drive, ” Proceedings of 15 th International Conference on Control, Automation and System (ICCAS), Busan, Korea, Oct. 13-16, 2015, pp. 779-783.
[270] Pamosoaji, A. K., and Hong, K.-S., “ Attractive-repulsive group-based particle swarm optimization (ARGPSO) for trajectory planning of multiple-vehicles, ” Proceedings of The First International Symposium on Swarm Behavior and Bio-Inspired Robotics (SWARM), Kyoto, Japan, Oct. 28-30, 2015, pp..
[271] Santosa, H., Huppert, T. J., and Hong, K.-S., “Fast optical signals during median nerve stimulation by using continuous-wave NIRS,” Proceedings of The 2015 International Conference on Automation, Cognitive Science, Optics, Micro Electro-mechanical System, and Information Technology (ICACOMIT), Bandung, Indonesia, Oct. 28-30, 2015, pp. -,
[272] Khan, M. J., and Hong, K.-S., “Active brain area identification using EEG-NIRS signal acquisition,” Proceedings of The 2015 International Conference on Automation, Cognitive Science, Optics, Micro Electro-mechanical System, and Information Technology (ICACOMIT), Bandung, Indonesia, Oct. 28-30, 2015, pp. 7 - 11.
[273] Shah, U.H., Choi, S.-H, Kim, S.-N., and Hong, K.-S., “Modified input shaping control of an overhead crane moving objects under water,” 2015 International Automatic Control Conference (CACS), Yilan, Taiwan, Nov. 18-20, 2015, pp. 71-76.
[274] Shah, U. S., Jeon, J. Y., and Hong, K.-S., “Vibration control of a refueling machine in a nuclear reactor,” Proceedings of the 20th Pacific Basin Nuclear Conference (PBNC), Beijing, China, April 5-9, 2016, pp. xx-xx. (NRF 2014 100%)
[275] Hong, K.-S. and Lim, M. T., “The 15th International Conference on Control, Automation and Systems,” IEEE Control Systems Magazine, vol. 36, no. 3, pp. 151-152, June 2016. (DOI: 10.1109/MCS.2016.2536113)
[276] Bhutta, M. R., Woo, S.-W., Khan, M. J. and Hong, K.-S., “Effect of anodal tDCS on human prefrontal cortex observed by fNIRS,” 6th IEEE RAS/EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob), UTown, Singapore, June 26-29, 2016, pp. 965-969.
[277] Khan, M. J., Liu, X., Bhutta, M. R. and Hong, K.-S.,“Drowsiness detection using fNIRS in different time windows for a passive BCI,” 6th IEEE RAS/EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob), UTown, Singapore, June 26-29, 2016, pp. 227-231.
[278] Shah, U. H., Piao, M., Choi, S.-H., and Hong, K.-S., “Residual vibration control of a quayside container crane,” Proceedings of the 35th Chinese Control Conference (CCC), Chengdu, China, July 27-29, 2016, pp. 343-348.
[279] Shah, U. H., Piao, M., Hong, K.-S., and Choi, S.-H., “Command-shaping control of quayside cranes with eight-pole reeving mechanism,” Proceedings of 2016 IEEE International Conference on Mechatronics and Automation (ICMA), Harbin, China, August 7-10, 2016, pp. 2030-2035.
[280] Zafar, A., Hong, K.-S., and Khan, M. J., “Initial dip detection based on both HbO and HbR vector-based phase analysis,” Proceedings of the SICE Annual Conference 2016, Tsukuba, Japan, September 20-23, 2016, pp. 543-548.
[281] Zafar, A., Hong, K.-S. and Khan, M. J., “Investigation of initial dips in mental arithmetic tasks: an fNIRS study,” Proceedings of 16th International Conference on Control, Automation and Systems (ICCAS 2016), Gyeongju, Korea, October 16-19, 2016, pp. 1122-1126.
[282] Nguyen, H.-D. and Hong, K.-S., “Bundled-optode method for detection of brain activity in functional near-infrared spectroscopy,” Proceedings of 16th International Conference on Control, Automation and Systems (ICCAS 2016), Gyeongju, Korea, October 16-19, 2016, pp. 1112-1117.
[283] Hasnain, S. and Hong, K.-S., “Dynamics and Vibrational Control of an Underwater Inverted Pendulum,” Proceedings of 16th International Conference on Control, Automation and Systems (ICCAS 2016), Gyeongju, Korea, October 16-19, 2016, pp. 644-649.
[284] Piao, M., Shah, U. H., Choi S.-H., and Hong, K.-S., “Modeling and Residual Vibration Control of a Quayside Container Crane,” Proceedings of 16th International Conference on Control, Automation and Systems (ICCAS 2016), Gyeongju, Korea, October 16-19, 2016, pp. 1414-1419.
[285] Liu, X. and Hong, K.-S., “Three class classification of fNIRS signals for RGB color stimulus in visual cortex,” Proceedings of 16th International Conference on Control, Automation and Systems (ICCAS 2016), Gyeongju, Korea, October 16-19, 2016, pp. 1107-1111.
[286] Khan, M. J., Zafar, A., and Hong, K.-S., “Hybrid EEG-NIRS based active command generation for quadcopter movement control,” Proceedings of 2016 International Automatic Control Conference (CACS), Taichung, Taiwan, November 9-11, 2016, pp. 163-168.
[287] Zafar, A., Hong, K.-S., and Khan M. J., “Vector-based approach for initial dip detection using HbO and HbR,” International Neurergonomics Conference, Paris, France, October 6-7, 2016. pp. xx-xx.
[288] Bhutta, M. R., Hong, K.-S., Shin, Y.-I., and Woo, S.-W., “Development of a combined fNIRS, EEG and tDCS system for real time brain stimulation and monitoring during rehabilitation,” 2016 fNIRS conference, Paris, France, October, 13-16, 2016, pp. xx-xx.
[289] Nguyen, H.-D., Hong, K.-S., and Yoo, H., “Real-time adaptive filtering for noise reduction in fNIRS data,” 2016 fNIRS conference, Paris, France, October, 13-16, 2016, pp. xx-xx.
[290]Hong, K.-S., and Khan, M. J., “Brain-machine interfaces with functional near-infrared spectroscopy,” Proceedings of the 22nd International Symposium on Artificial Life, Beppu, Japan, Jan. 19-21, 2017, pp. 7-12.
[290] Hong, K.-S., and Khan, M. J., “Brain-machine interfaces with functional near-infrared spectroscopy,” Proceedings of the 22nd International Symposium on Artificial Life, Beppu, Japan, Jan. 19-21, 2017, pp. 7-12.
[291] Zafar, A., Khan, M. J., and Hong, K.-S., "Temporal window size reduction for command generation using initial dips for BCI: an fNIRS study," The 8th International IEEE EMBS Neural Engineering Conference,Shanghai, China, May 25-28, 2017.
[292] Liu, X. and Hong, K.-S., "Investigation of visual merchandising display of fashion stores using brain scientific approach," 23rd Annual Meeting of the Organization for Human Brain Mapping (OHBM), Vancouver, Canada, June 25-29, 2017, Poster No. 3591.
[293] Nguyen, H. D., Hong, K.-S., Ghafoor, U., and Liu, X., "Distinguishable fNIRS images upon twelve different sensory stimulations," 23rd Annual Meeting of the Organization for Human Brain Mapping (OHBM), Vancouver, Canada, June 25-29, 2017, Poster No. 3594.
[294] Bhutta, M. R., Hong, K.-S., Woo, S. -W., Yaqub, M. A., and Liu, X., "Decoding of noxious and innocuous stimulations in human somatosensory cortex using fNIRS," 23rd Annual Meeting of the Organization for Human Brain Mapping (OHBM), Vancouver, Canada, June 25-29, 2017, Poster No. 3597.
[295] Khan, M. J., Zafar, A., and Hong, K.-S., "Comparison of brain areas for executed and imagined movements after motor training: An fNIRS study," Proceedings of 10th International Conference on Human System Interactions (HSI), Ulsan, South Korea, July 17-19, 2017, pp. 125-130.
[296] Liu, X. and Hong, K.-S, "Investigate the visual merchandising of a fashion store using fNIRS,"Proceedings of the 36th Chinese Control Conference (CCC), Dalian, China, July 26-28, 2017, pp. 11488-11493.
[297] Shah, U. H. and Hong, K.-S., "Residual vibration control of a nuclear refueling machine," Proceedings of the SICE Annual Conference 2017 (SICE 2017), Kanazawa, Japan, September 19-22, 2017, pp. 67-72.
[298] Zafar, A., Khan, M. J., and Hong, K.-S., "Initial-dip based identification of the brain area for right-hand finger movement," Proceedings of 2017 International Conference on Control, Automation and Systems (ICCAS), Ramada Plaza, Jeju, Korea, Oct. 18-21, 2017, pp. 1007-1011.
[299] Bhutta, M. R., Woo, S. W., Yoo, S.-H., Park, J. and Hong, K.-S., "Utilization of fNIRS signals as feedback for sensory decoding," Proceedings of 2017 International Conference on Control, Automation and Systems (ICCAS), Ramada Plaza, Jeju, Korea, Oct. 18-21, 2017, pp. 1012-1017.
[300] Shah, U. H., Piao, M., Kim, G.-H., and Hong, K.-S., "Active vibration control of a flexible rod in water," Proceedings of 2017 International Conference on Control, Automation and Systems (ICCAS), Ramada Plaza, Jeju, Korea, Oct. 18-21, 2017, pp. 1018-1023.
[301] Yaqub, M. A., Bhutta, M. R., Park, J. and Hong, K.-S., "Development of a dual wavelength 32-channel functional near-infrared spectroscopy based neuroimaging systems," Proceedings of 2017 International Conference on Control, Automation and Systems (ICCAS), Ramada Plaza, Jeju, Korea, Oct. 18-21, 2017, pp. 1024-1029.
[302]Khan, M. J.,Zafar, A., and Hong, K.-S, "Hybrid EEG-fNIRS based quadcopter control using active prefrontal commands,"Proceedings of the International Automatic Control Conference (CACS 2017), Howard Beach Resort Kenting, Pingtung, Taiwan, Nov. 12-15, 2017.
[303] Zafar, A., Khan, M. J., and Hong, K.-S, "Classification of prefrontal and motor cortex initial dips for fNIRS-based-BCI,"Proceedings of the International Automatic Control Conference (CACS 2017), Howard Beach Resort Kenting, Pingtung, Taiwan, Nov. 12-15, 2017.
[304] Shah, U. H. and Hong, K.-S., "Active vortex-induced vibration control of a flexible rod transported in water," Proceedings of the 11th Asian Control Conference, Gold Coast, Australia, Dec. 17-20, 2017, pp. 2429-2434.
[305] Kim, G.-H., Piao, M., and Hong, K.-S., "Sliding mode control of a dual-trolley mobile harbor crane in the presence of wave-induced ship motions," Proceedings of the 11th Asian Control Conference, Gold Coast, Australia, Dec. 17-20, 2017, pp. 2680-2685.
[306] Piao, M., Kim, G.-H., and Hong, K.-S., "Super twisting sliding mode control of an offshore container crane," Proceedings of the 62nd Annual Conference of the Institute of Systems, Control and Information Engineering, Kyoto, May 16-18, 2018.
[307] Yaqub, M. A., Woo, S.-W., Zafar, A., and Hong, K.-S., "Investigate the effect of HD-tDCS on the prefrontal cortex using fNIRS for neurorehabilitation," The 2nd International Neuroergonomics Conference, Philadelphia, PA, USA, June 27-29, 2018.
[308] Zafar, A., Ghafoor, and Hong, K.-S., "Comparison of active brain area for wide and dense optode configurations using initial dip," The 2nd International Neuroergonomics Conference, Philadelphia, PA, USA, June 27-29, 2018.
[309] Piao, M., Kim, G.-H., Shah, U., and Hong, K.-S., "Adaptive sliding mode control of a mobile harbor system," Proceedings of the 37th Chinese Control Conference, July 25-27, 2018, Wuhan, China, pp. 507-512, 2018.
[310] Shah, U. and Hong, K.-S., "A boundary control scheme for vibration suppression of a flexible beam transported under water," Proceedings of the SICE Annual Conference 2018, pp. 703-708, Nara, Japan, Sept. 11-14, 2018.
[311] Ghafoor, U., Zafar, A., and Hong, K.-S., "Cortical activation during voluntary and passive movement of human index finger," Proceedings of the 18th International Conference on Control, Automation and Systems, pp. 1129-1134, YongPyong Resort, PyeongChang, Korea, Oct. 17-20, 2018.
[312] Zafar, A., Ghafoor, U., Yaqub, M. A., and Hong, K.-S., "Determination of the parameters in the designed hemodynamic response function using Nelder-Mead algorithm," Proceedings of the 18th International Conference on Control, Automation and Systems, pp. 1135-1140, YongPyong Resort, PyeongChang, Korea, Oct. 17-20, 2018.
[313] Yoo, S.-H., Woo, S.-W., and Zafar, A., "Classification of three categories from prefrontal cortex using LSTM networks: fNIRS study," Proceedings of the 18th International Conference on Control, Automation and Systems, pp. 1141-1146, YongPyong Resort, PyeongChang, Korea, Oct. 17-20, 2018.
[314] Woo, S.-W., "Classification of stress and non-stress condition using functional near-infrared spectroscopy," Proceedings of the 18th International Conference on Control, Automation and Systems, pp. 1147-1151, YongPyong Resort, PyeongChang, Korea, Oct. 17-20, 2018.
[315] Huang, R., Kavichai, E., and Hong, K.-S., "Comparison of kernels in online SVM classification of fNIRS data," Proceedings of the 18th International Conference on Control, Automation and Systems, pp. 1152-1157, YongPyong Resort, PyeongChang, Korea, Oct. 17-20, 2018.
[316] Yaqub, M. A., Zafar, A., Ghafoor, U., and Hong, K.-S., "Development of a high density neuroimaging system using functional near-infrared spectroscopy," Proceedings of the 18th International Conference on Control, Automation and Systems, pp. 1158-1163,YongPyong Resort, PyeongChang, Korea, Oct. 17-20, 2018.
[317] Shah, U. and Hong, K.-S., "A boundary control scheme for suppressing vortex-induced vibrations of a flexible rod transported in water," Proceedings of the 22nd International Conference on Mechatronics Technology, Oct. 26-29, 2018, Jeju Island, Korea, 2018.
[318] Shah, U. and Hong, K.-S., "Dynamics and control of a nuclear refueling machine," Proceedings of the International Automatic Control Conference (CACS 2018), Taoyuan, Taiwan, Nov. 4-7, 2018.
[319] Zafar, A., Ghafoor, U., Yaqub, M. A., and Hong, K.-S., "Features and window size selection for quadcopter control using functional near-infrared spectroscopy," Proceedings of the First International Symposium on Instrumentation, Control, Artificial Intelligence, and Robotics, pp. 9-12,Bangkok, Thailand, Jan. 16-18, 2019.
[320] Zafar, A., Ghafoor, U., Yaqub, M. A., and Hong, K.-S., "Initial-dip-based classification for fNIRS-BCI," Proceedings of the SPIE 10865, Neural Imaging and Sensing, Article No. 108651N, San Francisco, California, USA,Feb. 2-7, 2019.
[321] Pham, P.-T. and Hong, K.-S., "Vibration control of a flexible marine riser with time-varying length," Proceedings of the 12th Asian Control Conference, pp. 778-783, Kitakyushu, Japan, June 9-12, 2019.
[322] Yaqub, M. A., Zafar, A., Ghafoor, U., and Hong, K.-S., "Design of a novel functional near-infrared spectroscopy system for human brain imaging," Proceedings of the 12th Asian Control Conference, pp. 1542-1547, Kitakyushu, Japan, June 9-12, 2019.
[323] Yaqub, M. A., Ghafoor, U., and Hong, K.-S., "Single sensor based high resolution system for functional near-infrared spectroscopy," Proceedings of the Optical Sensors and Sensing Congress,Article No. JTh2A.18, San Jose, California, USA, June 25-27, 2019.
[324] Kavichai, E., Huang, R., and Woo, S.-W., "Shared control strategies for BCI-based quadcopter control," Proceedings of the 16th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, pp. 154-157, Pattaya, Thailand, July 10-13, 2019.
[325] Kavichai, E., Huang, R., and Woo, S.-W., "Quadcopter movement control using image processing techniques," Proceedings of the 16th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, pp. 974-977, Pattaya, Thailand, July 10-13, 2019.
[326] Yoo, S.-H. and Hong, K.-S., "Hemodynamics analysis of patients with mild cognitive impairment during working memory tasks," 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2019), pp.4470-4473, Berlin, Germany, July 23-27, 2019.
[327] Ghafoor, U., Yoo, H.-R., and Hong, K.-S., "Improvement in cognitive function of MCI patients after application of acupuncture: A fNIRS study," 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2019), July. 23-27, 2019, Berlin, Germany.
[328] Yang, D., Yoo, S.-H., and Hong, K.-S., "Early detection of mild cognitive impairment patients via CNN: a fNIRS study" 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2019), July. 23-27, 2019, Berlin, Germany.
[329] Yoo, S.-H. and Hong, K.-S., "Diagnosis of mild cognitive impairment via task relevant hemodynamic responses," IFAC-PapersOnLine. Vol. 52, no. 11, pp. Proceedings of the 5th IFAC International Conference on Intelligent Control and Automation Sciences, Aug. 21-23, 2019, Belfast Northern Ireland, pp.
[330] Huang, R. and Hong, K.-S., "DEKF to estimate hemodynamic response and path-length in fNIRS data," Proceedings of the 19th International Conference on Control, Automation and Systems, pp. 188-193, Jeju Island, Korea, Oct. 15-18, 2019.
[331] Woo, S.-W., and Hong, K.-S., "A portable functional near-infrared spectroscopy system using 4-wavelength LEDs," Proceedings of the 19th International Conference on Control, Automation and Systems, pp. 579-584, Jeju Island, Korea, Oct. 15-18, 2019.
[332] Afzal, K. M. N., Zafar, A., and Hong, K.-S., "Detection and classification of three-class initial dips using vector phase analysis with dual-threshold circles: An fNIRS study," Proceedings of the 19th International Conference on Control, Automation and Systems, pp. 786-791, Jeju Island, Kora, Oct. 15-18, 2019.
[333] Ghafoor, U., Zafar, A., Yaqub, A., and Hong, K.-S., "Enhancement in classification accuracy of motor imagery signals with visual aid: An fNIRS-BCI Study," Proceedings of the 19th International Conference on Control, Automation and Systems, pp. 1201-1206, Jeju Island, Korea, Oct. 15-18, 2019.
[334] Yang, D. and Hong, K.-S., "Quadcopter control via onset eye blink signals: A BCI study," Proceedings of the 19th International Conference on Control, Automation and Systems, pp. 1334-1339, Jeju Island, Korea, Oct. 15-18, 2019.
[335] Yaqub, M. A., Ghafoor, U., and Hong, K.-S., "Real-time display of dense neuronal activation map using functional near-infrared spectroscopy," Proceedings of the 3rd International Conference on Robotics and Automation in Industry, pp. 1-6, Rawalpindi, Pakistan, Oct. 21-22, 2019.
[336] Ghafoor, U. Yaqub, M. A., Khan, M. N. A., and Hong, K.-S., "Improved classification accuracy of MCI patients after acupuncture treatment: An fNIRS study," Proceedings of the 3rd International Conference on Robotics and Automation in Industry, pp. 1-6,Rawalpindi, Pakistan, Oct. 21-22, 2019.
[337] Ghafoor, U., Yaqub, M. A., and Hong, K.-S., "Performance evaluation of temporal features for detection of mild cognitive impairment: An fNIRS study,"Proceedings of the 2019 International Automatic Control Conference (CACS), pp. xx-xx, Keelung, Taiwan, Nov. 13-16, 2019.
[338] Pham, P.-T. and Hong, K.-S., "Adaptive control of flexible marine risers with varying length," Proceedings of the 3rd International Symposium on Swarm Behavior and Bio-Inspired Robotics, pp. 209-215, Okinawa, Japan, Nov. 20-22, 2019.
[339] Yang, D. and Hong, K.-S., "Comparison of the neural biomarkers assessment methods for early detection of Alzheimer's disease," Proceedings of the International Conference on Mechatronics, Robotics & System Engineering (MoRSE 2019), pp. 34-39, Bali, Indonesia, Dec. 4-6, 2019.
[340] Yaqub, M. A., Ghafoor, U., Woo, S.-W., and Hong, K.-S., "Wireless high definition neuroimaging system for fNIRS using a single photosensor," Proceedings of the SPIE Neural Imaging and Sensing, Article No. 112261Q, San Francisco, California, USA, Feb. 1-6, 2020.
[341] Huang, R., Woo, S.-W., and Hong, K.-S., "Real-time motion artifacts and low-frequency drift correction for functional near-infrared spectroscopy, Proceedings of the 12th InternationalConference on Computer and Automation Engineering(ICCAE 2020), pp. 60-64,Sydney, NSW, Australia, Feb. 14-16, 2020.
[342] Qing, K., Yang, D., Huang, R., and Hong, K.-S., “Cognition-based evaluation of commercial advertisement videos using functional near-infrared spectroscopy,” Proceedings of the 39th Chinese Control Conference (CCC 2020), Shenyang, China, July 27-29, 2020, pp. 2803-2808.
[343] Pham, P.-T., Kim, G.-H, and Hong, K.-S., “ Boundary control of an overhead crane hoisting system with flexible rope in the presence of input saturation ,” Proceedings of the 20th International Conference on Control, Automation and Systems (ICCAS 2020), Busan, Korea, Oct. 13-16, 2020, pp. 64-68.
[344] Huang, R., Yang, D., Qing, K., and Hong, K.-S., “Online motion-artifact removal in fNIRS signals: Combined square-root cubature Kalman filter and weighted moving average model approach,” Proceedings of the 20th International Conference on Control, Automation and Systems (ICCAS 2020), Busan, Korea, Oct. 13-16, 2020, pp. 658-663.
[345] Qing, K., Yang, D., Huang, R., and Hong, K.-S., “A new hand exoskeleton framework for rehabilitation of fingers,” Proceedings of the 20th International Conference on Control, Automation and Systems (ICCAS 2020), Busan, Korea, Oct. 13-16, 2020, pp. 860-864.
[346] Yang, D., Huang, R., Qing, K., and Hong, K.-S., “Exploring the possibility for early detection of Alzheimer's disease with spatial-domain neural images,” Proceedings of the 20th International Conference on Control, Automation and Systems (ICCAS 2020), Busan, Korea, Oct. 13-16, 2020, pp. 1073-1078.
[347] Yaqub, M. A., Ghafoor, U., and Hong, K.-S., “Development of a noninvasive device for detection of degenerative brain disorders,” Proceedings of the 8th IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics (BioRob 2020), New York, USA, Nov. 29 – Dec. 1, 2020, pp. 199-204.
[348] Khan, M. N. A. and Hong, K.-S., “Investigating the effects of stimulation duration for brain-computer interface,” Proceedings of the 8th IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics (BioRob 2020), New York, USA, Nov. 29 – Dec. 1, 2020, pp. 635-640.
[349] Woo, S.-W., Kang, M.-K., and Hong, K.-S., “Classification of finger tapping tasks using convolutional neural network based on augmented data with deep convolutional generative adversarial network,” Proceedings of the 8th IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics (BioRob 2020), New York, USA, Nov. 29 – Dec. 1, 2020, pp. 328-332.
[350] Khan, M. N. A., Bhutta, M. R., and Hong, K.-S., “Effect of stimulation duration to the existence of initial dip,” 2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), July 20-24 2020, pp. 390-393.
[351]Pham, P.-T., Nguyen Q.-C., and Hong, K.-S., “Vibration control of an axially moving beam attached to a translating base,” 2021 International Symposium of Asian Control Association on Intelligent Robotics and Industrial Automation (IRIA), Goa, India, Sep. 19-22, 2021, pp. 370-375.
[352] Pham, P.-T., Kim, G.-H., Nguyen, Q.-C., and Hong, K.-S., “Control of an axially moving Timoshenko beam attached to a moving base,” Australian and New Zealand Control Conference 2021, Gold Coast, Australia, Nov. 25-26, 2021, pp. 30-34.
[353] Khan, M. N. A., Ghafoor, U., and Hong, K.-S., “Classification of sensorimotor cortex signals based on the task durations: an fNIRS-BCI study," 2021 International Conference on Artificial Intelligence and Mechatronics Systems (AIMS), Universitas Padjadjaran, Indonesia, July 12-16 2021, pp. 1-5.
[354] Ghafoor, U., Khan, M. N. A., and Hong, K.-S., “Visual training improves motor imagery ability for rehabilitation," 2021 International Conference on Artificial Intelligence and Mechatronics Systems (AIMS), Universitas Padjadjaran, Indonesia, July 12-16 2021, pp. 1-5.
[355] Kang M.-K., Hong, K.-S., “Application of deep learning techniques to diagnose mild cognitive impairment: Functional near-infrared spectroscopy study,” 2021 The 21st International Conference on Control, Automation and Systems (ICCAS 2021), Jeju, Korea, Oct. 12~15, 2021.
[350] Khan, M. N. A., Ghafoor, U., and Hong, K.-S., “Classification of sensorimotor cortex signals based on the task durations: an fNIRS-BCI study," Proceedings of the 2021 International Conference on Artificial Intelligence and Mechatronics Systems (AIMS 2021), Universitas Padjadjaran, Indonesia, July 12-16, 2021, pp. 1-5.
[351] Ghafoor, U., Khan, M. N. A., and Hong, K.-S., “Visual training improves motor imagery ability for rehabilitation," Proceedings of the 2021 International Conference on Artificial Intelligence and Mechatronics Systems (AIMS 2021), Universitas Padjadjaran, Indonesia, July 12-16, 2021, pp. 1-5.
[352] Pham, P.-T., Nguyen Q.-C., and Hong, K.-S., “Vibration control of an axially moving beam attached to a translating base,” Proceedings of the 2021 International Symposium of Asian Control Association on Intelligent Robotics and Industrial Automation (IRIA 2021), Goa, India, Sep. 19-22, 2021, pp. 370-375.
[353] Kang M.-K. and Hong, K.-S., “Application of deep learning techniques to diagnose mild cognitive impairment: Functional near-infrared spectroscopy study,” Proceedings of the 21st International Conference on Control, Automation and Systems (ICCAS 2021), Jeju, Korea, Oct. 12~15, 2021, pp. 2036-2042.
[354] Pham, P.-T., Kim, G.-H., Nguyen, Q.-C., and Hong, K.-S., “Control of an axially moving Timoshenko beam attached to a moving base,” Proceedings of the 2021 Australian and New Zealand Control Conference (ANZCC 2021), Gold Coast, Australia, Nov. 25-26, 2021, pp. 30-34.
[355] Khan, M.N.A., Ghafoor, U., Yang, D., and Hong, K.-S., “Reduction in command generation time for fNIRS-based BCI,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 36-41.
[356] Woo, S.-W, Kang, M.-K., Park, B.-J., and Hong, K.-S., “Sleep stage classification using electroencephalography via mel frequency cepstral coefficients,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 42-47.
[357] Kim, G.-H., Pham, P.-T., Yoon, M., Jeon, J.Y., and Hong, K.-S., “Vibration control for a flexible crane boom with truss structure,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 813-814.
[358] Nasser, F., Ullah, G., Siddiqui, M.A., Khan, M.J., Hong, K.-S., and Naseer, N., “Deep learning-based unmanned aerial vehicle control with hand gesture and computer vision,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 835-838.
[359] Munir, Z., Siddiqui, M.A., Ullah, G., Khan, M.J., Hong, K.-S., and Naseer, N., “Unmanned aerial vehicle control by eye-tracking using computer vision and machine learning,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 839-843.
[360] Razzaq, M.A., Naseer, N., Nazeer, H., Khan, M.J., Hong, K.-S., and Ullah, G., “Performance analysis of machine learning algorithms for EMG based gestures,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 844-848.
[361] Akhter, J., Naseer, N., Rashid, A., Khan, M.J., Hong, K.-S., and Ullah, G., “EMG signals based gesture recognition accuracy improvement by machine learning classifiers/algorithms,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 849-855.
[362] Ahmed, I., Rehan, M., Hong, K.-S., and Basit, A., “A consensus-based approach for economic dispatch considering multiple fueling strategy of electricity production sector over a smart grid,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 1196-1201.
[363] Huang, R., Yang, D., and Hong, K.-S., “Remove the motion artifacts in fNIRS using simplified residual fully connected neural networks,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 1359-1364.
[364] Shah, U.H., and Hong, K.-S., “A boundary control scheme for the suppression of vortex-induced vibrations of a flexible rod transported in water,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 1511-1516.
[365] Yoo, S.-H., and Hong, K.-S., “Classification of six sound categories using functional near-infrared spectroscopy,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 1553-1557.
[366] Ghafoor, U., Khan, M.N.A., Yang, D., and Hong, K.-S., “Influence of tACS/tDCS on resting state effective connectivity in the frontal cortex: An functional near-infrared spectroscopy study,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 1563-1568.
[367] Yang, D., Huang, R., Ghafoor, U., Khan, M.N.A., and Hong, K.-S., “Blind source separation of transcranial direct current stimulation from simultaneous electroencephalograph measurement,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 1569-1574.
[368] Kang, M.-K., and Hong K.-S., “A sleep stage classification method using deep learning by extracting the characteristics of frequency domain from a single EEG channel,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 1575-1580.
[369] Kim, N., Park, C.H., Woo, S.-W., Kim, H.-H., Kim, Y.J., Lee, Y.-M., Hong K.-S., and Kim, C.-S., “Wearable frequency division multiplexing fNIRS system with silicone elastomeric substrate patch,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 1581-1582.
[370] Khan, M.N.A, Ghafoor, U., and Hong, K.-S., “Investigating the effect of acupuncture treatment on MCI patients using classification techniques,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 1583-1588.
[371] Elisabet, A., Yang, D., Kang, M.-K., and Hong K.-S., “Cognitive response to nitric oxide on aging people,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 1589-1592.
[372] Hasim, M.Y.S., Bobur, S., and Hong K.-S., “Design of multichannel portable for functional near-infrared spectroscopy/electroencephalography hybrid system,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 1593-1597.
[373] Pham, P.-T., Nguyen, Q.-C., and Hong, K.-S., “Vibration control of a flexible varying-length beam attached to a translating base under an unknown boundary disturbance,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 1642-1647.
[374] Basit, A., Tufail, M., Hong, K.-S., and Rehan, M., “Event-triggered distributed exponential H∞ observers design for discrete-time nonlinear systems over wireless sensor networks,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 1730-1735.
[375] Ahmed, I., Rehan, M., Hong, K.-S., and Basit, A., “Event-triggered leaderless robust consensus control of nonlinear multi-agents under disturbances,” Proceedings of the 2022 13th Asian Control Conference (ASCC 2022), Jeju, Korea, May. 4-7, 2022, pp. 1736-1741.